Valid

GB/T 39688-2020Test method for determining density of ceramic coatings (English PDF)

陶瓷涂层密度的测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39688-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 14, 2020

Implementation date

July 1, 2021

Scope

GB/T 39688-2020 is the English-translated version of 陶瓷涂层密度的测试方法.

GB/T 39688-2020 is the Chinese standard "Test method for determining density of ceramic coatings".

Its scope clause reads: This standard specifies the principles, instruments and equipment, samples, test procedures, calculation of results, test accuracy, and test methods for the density of ceramic coatings: Error analysis and test report: This standard applies to ceramic coatings with a thickness greater than 0:1mm:. Its clauses include terms and definitions; principle.

Found what you need?

Document preview — GB/T 39688-2020

National Standard of the People's Republic of China

ICS
81.060.30
Classification
Q 32

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Principle

1 Scope

This standard specifies the principles, instruments and equipment, samples, test procedures, calculation of results, test accuracy, and test methods for the density of ceramic coatings:

Error analysis and test report:

This standard applies to ceramic coatings with a thickness greater than 0:1mm:

2 Normative references

The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article

Pieces: For undated references, the latest version (including all amendments) applies to this document:

GB/T 1216 outside micrometer

GB/T 25995 Test method for density and apparent porosity of fine ceramics

3 Terms and definitions

The following terms and definitions apply to this document:

3:1

Apparent solidvolume

The sum of the volume of solid material and closed pores:

3:2

Density

The ratio of the mass of the dry material to its apparent volume:

3:3

Ratioofthedryweight

The mass ratio of dry uncoated sample (substrate) to coated sample:

4 Principle

Under the premise that the interface between the ceramic coating and the uncoated sample (substrate) is continuous and without peeling, the substrate is measured based on the Archimedes drainage method

And the density of the coating-matrix composite (coating sample), and the solution of the density between the matrix, the coating sample and the ceramic coating is derived through mathematics

Analyze the relationship and calculate the density value of the ceramic coating: This method is suitable for both single coating and multilayer composite coating: Testing multiple layers

When coating a sample, consider a certain coating on the surface of the sample as a single-layer coating, and the rest of the sample as the substrate, and so on, you can measure

The density of any coating: According to the analytical relationship between the density of the substrate, the coating sample and the ceramic coating, the density of the ceramic coating can be measured as follows

Three parameters are calculated:

a) The density rhos of the uncoated sample (substrate);

b) The density of the coated sample rhocomp;

c) The dry weight ratio k of the substrate and the coating sample:

The values of rhocomp and rhos are measured by Archimedes method according to GB/T 25995:

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39688-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39688-2020

$105.00