Valid

GB/T 39639-2020Test methods of dynamic adhesive properties for dipped cords (English PDF)

浸胶帘线、线绳动态粘合性能试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39639-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 14, 2020

Implementation date

July 1, 2021

Scope

GB/T 39639-2020 is the English-translated version of 浸胶帘线、线绳动态粘合性能试验方法.

GB/T 39639-2020 is the Chinese standard "Test methods of dynamic adhesive properties for dipped cords".

Its scope clause reads: This standard specifies the test methods for the dynamic adhesion of dipped cords, cords and rubber: This standard is applicable to the evaluation of the dynamic adhesion performance of dipped cords and cords for rubber products: Dipped yarn and rubber for rubber products The dynamic adhesive performance evaluation of the glue can also refer to implementation:. Its clauses include terms and definitions; principle.

Found what you need?

Document preview — GB/T 39639-2020

National Standard of the People's Republic of China

ICS
83.140.99
Classification
G 47

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Principle

1 Scope

This standard specifies the test methods for the dynamic adhesion of dipped cords, cords and rubber:

This standard is applicable to the evaluation of the dynamic adhesion performance of dipped cords and cords for rubber products: Dipped yarn and rubber for rubber products

The dynamic adhesive performance evaluation of the glue can also refer to implementation:

2 Normative references

The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article

Pieces: For undated references, the latest version (including all amendments) applies to this document:

GB/T 2941 Rubber Physical Test Method General Procedure for Sample Preparation and Adjustment

GB/T 8170 Numerical rounding rules and the expression and determination of limit values

GB/T 31333 Test method for bonding strength of dipped cord

GB/T 32110 Terms and definitions of dipped framework materials

3 Terms and definitions

The following terms and definitions defined in GB/T 32110 apply to this document:

3:1

Adhesion retention rate

After the dynamic test, the arithmetic average of the adhesion of all samples, and the arithmetic average of the adhesion of all the samples without the dynamic test

Ratio:

Note: Expressed in percentage (%):

3:2

Falingoffnumberoftimes

During the dynamic adhesion test, when the sample falls off after reciprocating shearing motion, the arithmetic average of the number of reciprocating motions of all samples:

4 Principle

The dipped cord or dipped cord and rubber are vulcanized to prepare a sample, as shown in Figure 1: First connect the two ends of the sample with two different quality

The load weight is firmly connected, and the sample to be tested is straightened by the weight and fixed on the test device with heating function; during the test, it is at a certain temperature

Next, through the swing mechanism, the rubber block in the sample is moved along the direction of extension of the sample with a certain amplitude and frequency relative to the cord or cord in the sample:

The reciprocating shearing motion produces continuous dynamic shear between the cord or cord and the rubber interface: As the test continues, the cord or cord and the rubber

The adhesive force of the glue interface will gradually decrease, and the test will stop when the test is reached; or continue the test until the rubber block and the dipping cord or cord are separated drop: Take the sample's adhesion retention rate after a certain time test under the set reciprocating shear motion frequency, temperature and swing amplitude or sample

The number of reciprocating shear motions under the set reciprocating shear motion frequency, temperature and swing amplitude until the sample breaks off

The dynamic bonding performance of dipped cord or cord and rubber at low temperature:

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39639-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39639-2020

$125.00