Valid

GB/T 39633-2020General specification for integrated servo motors system for cooperative robot (English PDF)

协作机器人用一体式伺服电动机系统通用规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (29 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39633-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 14, 2020

Implementation date

July 1, 2021

Scope

GB/T 39633-2020 is the English-translated version of 协作机器人用一体式伺服电动机系统通用规范.

GB/T 39633-2020 is the Chinese standard "General specification for integrated servo motors system for cooperative robot".

Its scope clause reads: This standard specifies the terms and definitions, operating conditions, functions and interfaces, and technical requirements of integrated servo motor systems for collaborative robots: Summing test methods, inspection rules and delivery preparations: This standard applies to the design, manufacture, and inspection of DC-powered integrated servo motor systems for collaborative robots (hereinafter referred to as "systems") And acceptance: Servo motors (hereinafter referred to as "motors"), servo drives (hereinafter referred to as "drives"), reducers and brakes that constitute the system Devices, sensors, etc: can be implemented by reference:.

Found what you need?

Document preview — GB/T 39633-2020

National Standard of the People's Republic of China

ICS
29.160.30
Classification
K 24

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Operating conditions
  • 5 Functions and interfaces
  • 6 Technical requirements and test methods
  • 7 Inspection rules
  • 8 Delivery preparation
  • Appendix A (informative appendix) System structure and components

1 Scope

This standard specifies the terms and definitions, operating conditions, functions and interfaces, and technical requirements of integrated servo motor systems for collaborative robots:

Summing test methods, inspection rules and delivery preparations:

This standard applies to the design, manufacture, and inspection of DC-powered integrated servo motor systems for collaborative robots (hereinafter referred to as "systems")

And acceptance: Servo motors (hereinafter referred to as "motors"), servo drives (hereinafter referred to as "drives"), reducers and brakes that constitute the system

Devices, sensors, etc: can be implemented by reference:

2 Normative references

The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article

Pieces: For undated references, the latest version (including all amendments) applies to this document:

GB/T 191 Packaging, Storage and Transportation Graphic Mark

GB/T 2423:1-2008 Environmental testing of electric and electronic products Part 2: Test method Test A: Low temperature

GB/T 2423:2-2008 Environmental testing of electric and electronic products Part 2: Test method Test B: High temperature

GB/T 2423:3 Environmental Test Part 2: Test Method Test Cab: Constant Damp Heat Test

GB/T 2423:5 Environmental Test Part 2: Test Method Test Ea and Guideline: Impact

GB/T 2423:10-2019 Environmental Test Part 2: Test Method Test Fc: Vibration (Sine)

GB/T 2828:1-2012 Sampling inspection procedure by attributes Part 1: Batch inspection sampling searched by acceptance quality limit (AQL) plan

GB/T 2900:26-2008 Electrician terminology control motor

GB 4824-2019 Industrial, scientific and medical equipment radio frequency disturbance characteristic limits and measurement methods

GB/T 5226:1-2019 Electrical safety of machinery Electrical equipment of machinery Part 1: General technical conditions

GB/T 6113:101-2016 Radio disturbance and immunity measurement equipment and measurement method specification Part 1-1: Radio disturbance

And immunity measuring equipment measuring equipment

GB/T 6113:102-2018 Radio disturbance and immunity measurement equipment and measurement method specification Part 1-2: Radio disturbance

Coupling device for conducting disturbance measurement with immunity measuring equipment

GB/T 6113:104-2016 Radio disturbance and immunity measurement equipment and measurement method specification Part 1-4: Radio disturbance

And immunity measurement equipment radiated disturbance measuring antenna and test site

GB/T 6113:201-2018 Radio disturbance and immunity measuring equipment and measurement method specification Part 2-1: Radio disturbance

And immunity measurement method conducted disturbance measurement

GB/T 6113:203-2016 Radio disturbance and immunity measurement equipment and measurement method specification Part 2-3: Radio disturbance

And immunity measurement method radiated disturbance measurement

GB/T 7345-2008 Basic technical requirements for control motors

GB/T 7346-2015 Control motor basic shape structure type

GB/T 10069:1 Rotating electrical machine noise measurement method and limit value Part 1: Rotating electrical machine noise measurement method

GB/T 12643-2013 Robots and Robot Equipment Vocabulary […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 29 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39633-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
29 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39633-2020

$510.00