GB/T 39568-2020General requirements for drive micro motors (English PDF)
驱动微电机通用技术要求
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39568-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 14, 2020
Implementation date
July 1, 2021
Scope
GB/T 39568-2020 is the English-translated version of 驱动微电机通用技术要求.
GB/T 39568-2020 is the Chinese standard "General requirements for drive micro motors".
Its scope clause reads: This standard specifies the shape, model and operating conditions, technical requirements and test methods, inspection rules, delivery preparation and use of drive micromotors: Household services: This standard applies to the design, manufacture, inspection and acceptance of drive micromotors (hereinafter referred to as "motors"):. Its clauses include shape, model and operating conditions.
Found what you need?
Document preview — GB/T 39568-2020
National Standard of the People's Republic of China
- ICS
- 29.160.30
- Classification
- K 24
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Shape, model and operating conditions
- 4 Technical requirements and test methods
- 5 Inspection rules
- 6 Delivery preparation
- 7 Customer Service
1 Scope
This standard specifies the shape, model and operating conditions, technical requirements and test methods, inspection rules, delivery preparation and use of drive micromotors:
Household services:
This standard applies to the design, manufacture, inspection and acceptance of drive micromotors (hereinafter referred to as "motors"):
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 755 Rotating motor rating and performance
GB/T 1971 Rotating motor wire end marking and direction of rotation
GB/T 2423:1-2008 Environmental testing of electric and electronic products Part 2: Test method Test A: Low temperature
GB/T 2423:2-2008 Environmental testing of electric and electronic products Part 2: Test method Test B: High temperature
GB/T 2423:16-2008 Environmental testing of electric and electronic products Part 2: Test method Test J and guideline: Mould
GB/T 2423:17-2008 Environmental testing of electric and electronic products Part 2: Test method Test Ka: Salt spray
GB/T 2828:1-2012 Sampling inspection procedure by attributes Part 1: Batch inspection sampling searched by acceptance quality limit (AQL) plan
GB/T 4942:1 Degree of protection of the overall structure of rotating electrical machines (IP code) Classification
GB/T 6113:203 Specification for radio disturbance and immunity measuring equipment and measurement methods Part 2-3: Radio disturbance and immunity
Degree measurement method radiated disturbance measurement
GB/T 6113:204 Radio disturbance and immunity measurement equipment and measurement method specification Part 2-4: Radio disturbance and immunity
Immunity measurement method
GB/T 7345-2008 Basic technical requirements for control motors
GB/T 7346 Control motor basic appearance structure type
GB/T 10068 The measurement, evaluation and limit of mechanical vibration of motors with a shaft center height of 56mm and above
GB/T 10069:1 Rotating electrical machine noise measurement method and limit value Part 1: Rotating electrical machine noise measurement method
GB/T 10405 Control motor model naming method
GB 17799:3 General Standard for Electromagnetic Compatibility for Emissions in Residential, Commercial and Light Industrial Environments
GB 17799:4 EMC general standard for emission in industrial environment
GB/T 18211 General safety requirements for micromotors
JB/T 8162 Control Motor Packaging Technical Conditions
3 Shape, model and operating conditions
3:1 Basic appearance structure and installation type
The basic appearance structure and installation type of the motor should meet the requirements of GB/T 7346:
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 39568-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 39568-2020
$300.00