GB/T 39555-2020Intelligent laboratory—Instruments and equipment—Data interface of climatic and environmental testing equipment (English PDF)
智能实验室 仪器设备 气候、环境试验设备的数据接口
This is a limited preview
Buy now to download the full PDF (48 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39555-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 14, 2020
Implementation date
July 1, 2021
Scope
GB/T 39555-2020 is the English-translated version of 智能实验室 仪器设备 气候、环境试验设备的数据接口.
GB/T 39555-2020 is the Chinese standard "Intelligent laboratory—Instruments and equipment—Data interface of climatic and environmental testing equipment".
Its scope clause reads: This standard specifies the terms and definitions, data definitions, data definitions, Data types and data structures, etc: This standard applies to climate and environmental test equipment with data interface functions in the field of smart laboratories: Other smart laboratory equipment Ready for reference:. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 39555-2020
National Standard of the People's Republic of China
- ICS
- 35.240.50
- Classification
- N 60
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions1
- 4 Data definition2
- 5 Data type2
- 6 Data structure3
- 6:1 General data3
- 6:1:1 General Data3
- 6:1:2 Manufacturer3
- 6:1:3 Model4
- 6:1:4 Serial number4
- 6:1:5 Software version number4
- 6:1:6 Date4
- 6:1:7 Time5
- 6:1:8 Studio5
- 6:1:9 Power6
- 6:1:10 Maximum operating current8
- 6:1:11 Weight8
- 6:1:12 Production date8
- 6:2 Timer data8
- 6:2:1 Timer data8
- 6:2:2 Timer number9
- 6:3 Program data11
- 6:3:1 Program data11
- 6:3:2 Program number11
- 6:4 Status data16
- 6:4:1 Status data16
- 6:4:2 Alarm number17
- 6:4:3 Keypad lock17
- 6:4:4 Running status17
- 6:4:5 Program number19
- 6:4:6 Relay20
- 6:4:7 Time21
- 6:4:8 Output percentage23
- 6:4:9 Power failure recovery mode24
- 6:4:10 Energy-saving mode25
- 6:4:11 Humidity switch setting value25
- 6:4:12 Test area setting26
- 6:4:13 Power amplifier gain26
- 6:5 Voltage data26
- 6:5:1 Voltage data26
- 6:5:2 Three-phase power supply P1 phase voltage27
- 6:5:3 Three-phase power supply P2 phase voltage27
- 6:5:4 Three-phase power supply P3 phase voltage27
- 6:5:5 Moving coil voltage27
- 6:5:6 Excitation voltage28
- 6:6 Current data28
- 6:6:1 Current data28
- 6:6:2 Condensing fan29
- 6:6:3 Heater29
- 6:6:4 Humidifier29
- 6:6:5 Door and window frames29
- 6:6:6 Inner glass30
- 6:6:7 Outer glass30
- 6:6:8 Three-phase power supply P1 phase current30
- 6:6:9 Three-phase power supply P2 phase current30
- 6:6:10 Three-phase power supply P3 phase current31
- 6:6:11 Moving coil current31
- 6:6:12 Excitation current31
- 6:7 Temperature data31
- 6:7:1 Temperature data31
- 6:7:2 Setpoint32
- 6:7:3 Measured value33
- 6:7:4 Upper limit33
- 6:7:5 Lower limit33
- 6:7:6 Upper limit alarm value33
- 6:7:7 Lower limit alarm value33
- 6:7:8 Preheating in high temperature zone34
- 6:7:9 High temperature zone set value34
- 6:7:10 Pre-cooling in low temperature zone34
- 6:7:11 Low temperature zone setting value34
- 6:7:12 Measured value in high temperature zone35
- 6:7:13 Measured value in low temperature zone35
- 6:7:14 Sample35
- 6:7:15 Compressor exhaust35
- 6:7:16 Compressor return air36
- 6:7:17 Saturation bucket setting value36
- 6:7:18 Measured value of saturation bucket36
- 6:7:19 Moving coil temperature36
- 6:7:20 Excitation temperature36
- 6:7:21 Oil source temperature37
- 6:8 Humidity data37
- 6:8:1 Humidity data37
- 6:8:2 Setpoint37
- 6:8:3 Measured value38
- 6:8:4 Upper limit38
- 6:8:5 Lower limit38
1 Scope
This standard specifies the terms and definitions, data definitions, data definitions,
Data types and data structures, etc:
This standard applies to climate and environmental test equipment with data interface functions in the field of smart laboratories: Other smart laboratory equipment
Ready for reference:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 39556-2012 Intelligent laboratory equipment communication requirements
3 Terms and definitions
The following terms and definitions defined in GB/T 39556-2012 apply to this document: For ease of use, the following is repeated
Certain terms and definitions in GB/T 39556-2012:
3:1
Data
A formal representation of facts, concepts or instructions, suitable for manual or automatic communication, interpretation, or processing:
[GB/T 21062:3-2007, definition 3:1]
3:2
Dataelement
The same set of attributes describe the data unit of definition, identification, representation and allowable value, which is the indivisible basis of the data output by the data interface
This unit:
[GB/T 19581-2004, definition 3:7]
3:3
Datainterface
The interface for transferring data and exchanging information between computer software systems is realized in the form of electronic files:
[GB/T 25632-2010, definition 3:2]
3:4
Data structure
The internal structure of the data output by the software data interface contains several different data elements:
[GB/T 25632-2010, definition 3:4]
3:5
Keyword
The name of the primary key, subkey, and value item:
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 48 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 39555-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 39555-2020
$770.00