Valid

GB/T 39427-2020Non-destructive testing—Testing method for determining the size of Ir192 industrial radiographic source (English PDF)

无损检测 工业Ir192伽玛射线源尺寸测定方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39427-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 19, 2020

Implementation date

June 1, 2021

Scope

GB/T 39427-2020 is the English-translated version of 无损检测 工业Ir192伽玛射线源尺寸测定方法.

GB/T 39427-2020 is the Chinese national standard covering non-destructive testing, Testing method for determining the size of Ir192 industrial radiographic source.

It was issued on 19 November 2020 and has been in force since 1 June 2021, as a first edition. The document is under the responsibility of the Standardization Administration of China.

This page is published from the official record of the 2020 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — GB/T 39427-2020

National Standard of the People's Republic of China

ICS
19.100
Classification
J 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Procedures for Qualification and Use of Measuring Systems
  • 4.1 Test set-up
  • 4.2 Time domain response
  • 4.3 Frequency response
  • 4.4 Free-field parameters
  • 4.5 Echo sound measurement
  • 4.6 Impedance
  • 4.7 Relative sensitivity
  • 5 Tests and Test Requirements for an Approved Measuring System and Its Components
  • 5.1 Personnel
  • 5.2 Description of the method
  • 5.3 Process sequence
  • 5.4 Equipment
  • 6 Measurement of Direct Voltage
  • 6.1 General Principles 2
  • 6.2 Elimination rate
  • 6.3 Confirmation of Pollutant Accumulation 3
  • 6.4 Micro bubble elimination evaluation steps
  • 7 Measurement of Alternating Voltage
  • 7.1 Report of test conditions 3
  • 7.2 Reporting of test results
  • 8 Measurement of Lightning Impulse Voltage
  • 9 Measurement of Switching Impulse Voltage

1 Foreword

GB/T 39427-2020 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 19 November 2020 and has been in force since 1 June 2021.

The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 18 pages in English translation.

2 Scope Preview

GB/T 39427-2020 falls under ICS 19.100, in the field of testing.

This catalogue holds 637 other GB/T standards in that field.

In this catalogue, GB/T standards carry edition years from 1963 to 2026.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

English translation: about 18 pages

4 Related standards

Other editions:

GB/T 39427-2026 (later edition)

Standards on related subjects:

GB/T 38896-2020 — Non-destructive testing—Integrated non-destructive testing—General principles

GB/T 38898-2020 — Non-destructive testing - Testing method for measuring coating bond strength

GB/T 39432-2020 — Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block

5 Classification and status

International classification (ICS): 19.100

Chinese Standard Classification (CCS): J 04

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 39427-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
18 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39427-2020

$210.00