Valid

GB/T 39425-2020General technical specfication for the permanent magnetic direct drive motor bogie of urban rail transit (English PDF)

城市轨道交通车辆永磁直驱转向架通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39425-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 19, 2020

Implementation date

June 1, 2021

Scope

GB/T 39425-2020 is the English-translated version of 城市轨道交通车辆永磁直驱转向架通用技术条件.

GB/T 39425-2020 is the Chinese standard "General technical specfication for the permanent magnetic direct drive motor bogie of urban rail transit".

Its scope clause reads: This standard specifies the classification, general requirements, requirements, test methods, inspection rules, signs, and markings of permanent magnet direct drive bogies for urban rail transit vehicles.

Packaging, transportation and storage. This standard applies to axle-mounted permanent magnet direct-drive bogies of urban rail transit vehicles with a maximum operating speed of no more than 120km/h (below Referred to as bogie).

Found what you need?

Document preview — GB/T 39425-2020

National Standard of the People's Republic of China

ICS
45.060.20
Classification
S 33

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope1
  • 2 Normative references1
  • 3 Terms and definitions2
  • 4 Bogie classification3
  • 5 General requirements3
  • 6 Requirements4
  • 7 Test method7
  • 8 Inspection rules8
  • 9 Marking, packaging, transportation and storage9

1 Scope

This standard specifies the classification, general requirements, requirements, test methods, inspection rules, signs, and markings of permanent magnet direct drive bogies for urban rail transit vehicles.

Packaging, transportation and storage.

This standard applies to axle-mounted permanent magnet direct-drive bogies of urban rail transit vehicles with a maximum operating speed of no more than 120km/h (below

Referred to as bogie).

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.

For undated references, the latest version (including all amendments) applies to this document.

GB 146.1 Standard gauge railway locomotive and rolling stock limits

GB/T 5068 Steel for railway locomotives and vehicle axles

GB/T 5599 Code for Dynamic Performance Evaluation and Test Appraisal of Railway Vehicles

GB/T 25123.4 Rotating electrical machines for electric traction rail rolling stock and road vehicles-Part 4.Permanent magnet synchronous motors connected to electronic converters

GB/T 25343 (all parts) Railway applications for welding of rail vehicles and their parts

GB 50157 Metro Design Code

CJJ/T 96 Metro limit standard

TB/T 1491 oil damper for rolling stock

TB/T 1718.2 Rolling Stock Wheelset Assembly Part 2.Vehicles

TB/T 2211 Compressed steel coil spring for rolling stock

TB/T 2395 Design Method for Power Axle of Locomotive and Rolling Stock

TB/T 2562 Test method for static balance and wheel set dynamic balance of railway passenger car wheels

TB/T 2817 Rolled steel integral wheels for railway freight cars

TB/T 2841 Air spring for railway vehicles

TB/T 2843 General technical requirements for rubber elastic components for rolling stock

TB/T 2945 LZ50 steel axle and billet technical requirements for railway vehicles

TB/T 2980 brake disc for rolling stock

TB/T 3196 Synthetic brake shoe for locomotive

TB/T 3541.3 Locomotive and rolling stock disc brakes Part 3.Synthetic brake pads

TB/T 3549.1 Specification for Strength Design and Test Appraisal of Locomotives and Rolling Stock Bogies Part 1.Bogie Frame

ISO 1940-1 Balance quality requirements for rigid rotors with mechanical vibration Part 1.Allowable residual unbalance measurement […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39425-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39425-2020

$195.00