GB/T 39399-2020General specification for BeiDou navigation satellite system geodetic receiver (English PDF)
北斗卫星导航系统测量型接收机通用规范
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39399-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
June 1, 2021
Scope
GB/T 39399-2020 is the English-translated version of 北斗卫星导航系统测量型接收机通用规范.
GB/T 39399-2020 is the Chinese standard "General specification for BeiDou navigation satellite system geodetic receiver".
Its scope clause reads: This standard specifies the technical requirements, inspection methods, and quality assessment of Beidou satellite navigation system survey receivers (hereinafter referred to as receivers) Procedures, signs, packaging, transportation, storage and instructions for use.
This standard applies to the development, production, use and inspection of receivers, and other measurement receivers can be used as reference. Its clauses include terms and definitions, abbreviations.
Found what you need?
Document preview — GB/T 39399-2020
National Standard of the People's Republic of China
- ICS
- 49.020
- Classification
- V 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions, abbreviations1
- 3.1 Terms and definitions1
- 3.2 Abbreviations2
- 4 Technical requirements3
- 4.1 Structure and appearance3
- 4.2 Electrical3
- 4.3 Setting and display3
- 4.4 Interface and output4
- 4.5 Data storage4
- 4.6 Signal reception performance4
- 4.7 Time characteristics6
- 4.8 Internal noise level7
- 4.9 Measurement accuracy7
- 4.10 Antenna phase center consistency7
- 4.11 1PPS stability7
- 4.12 Data processing software7
- 4.13 Environmental adaptability7
- 4.14 Security Protection8
- 4.15 Electromagnetic compatibility8
- 4.16 Reliability9
- 5 Inspection method9
- 5.1 General9
- 5.2 Inspection site and inspection equipment9
- 5.3 Structure and appearance9
- 5.4 Electrical9
- 5.5 Settings and display9
- 5.6 Interface and output10
- 5.7 Data storage10
- 5.8 Signal reception performance10
- 5.9 Time characteristics10
- 5.10 Internal noise level11
- 5.11 Measurement accuracy11
- 5.12 Antenna phase center consistency13
- 5.13 1PPS stability13
- 5.14 Data processing software14
- 5.15 Environmental adaptability14
- 5.16 Safety protection15
- 5.17 Electromagnetic compatibility15
- 5.18 Reliability15
- 6 Quality assessment procedures16
- 6.1 Inspection classification16
- 6.2 Inspection items and sequence16
- 6.3 Identification and inspection17
- 6.4 Quality consistency inspection17
- 7 Marking, packaging, transportation and storage19
- 7.1 Sign19
- 7.2 Packaging19
- 7.3 Transport19
- 7.4 Storage19
- 8 Instructions for use20
- Appendix A (informative appendix) Product unqualified classification21
1 Scope
This standard specifies the technical requirements, inspection methods, and quality assessment of Beidou satellite navigation system survey receivers (hereinafter referred to as receivers)
Procedures, signs, packaging, transportation, storage and instructions for use.
This standard applies to the development, production, use and inspection of receivers, and other measurement receivers can be used as reference.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.
For undated reference documents, the latest version (including all amendments) applies to this document.
GB/T 191 Packaging, Storage and Transportation Graphic Mark
GB/T 2828.1-2012 Sampling inspection procedures by attributes Part 1.Batch inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 2829 Periodic Inspection Attribute Sampling Procedure and Table (Applicable to the Inspection of Process Stability)
GB/T 4208-2017 Enclosure protection grade (IP code)
GB/T 4857.5 Packaging and transportation package drop test method
GB/T 5080.1-2012 Reliability Test Part 1.Test Conditions and Principles of Statistical Inspection
GB/T 5080.7 Equipment Reliability Test The verification test plan for failure rate and mean time between failures under the assumption of constant failure rate
GB/T 6388 Transport packaging receiving and dispatching signs
GB/T 9254-2008 Information Technology Equipment Radio Disturbance Limits and Measurement Methods
GB/T 9969 General Rules for the Use of Industrial Products
GB/T 13384 General technical conditions for packaging of mechanical and electrical products
GB/T 17626.3-2016 Electromagnetic compatibility test and measurement technology Radio frequency electromagnetic field radiation immunity test
GB/T 39267-2020 Beidou satellite navigation terminology
3 Terms and definitions, abbreviations
3.1 Terms and definitions
The following terms and definitions defined in GB/T 39267-2020 apply to this document.
3.1.1 Beidou satellite navigation system survey receiver
GNSS terminal equipment with at least Beidou satellite navigation system tracking capability for high-precision positioning.
Note. A type of GNSS survey receiver.
3.1.2 Data link
The communication unit used by the receiver for real-time dynamic measurement.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 39399-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 39399-2020
$390.00