GB/T 39360-2020Evaluation and testing of performance of industrial robot control system (English PDF)
工业机器人控制系统性能评估与测试
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39360-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
June 1, 2021
Scope
GB/T 39360-2020 is the English-translated version of 工业机器人控制系统性能评估与测试.
GB/T 39360-2020 is the Chinese standard "Evaluation and testing of performance of industrial robot control system". Its scope clause reads: This standard specifies the performance model, performance indicators, test evaluation methods, test documentation requirements and compliance of industrial robot control systems Evaluation rules.
This standard applies to industrial robot control systems, and is available for industrial robot control system design developers, testers and evaluators Staff and so on.
Note. This standard does not specify the measurement range to reach the assessment level or compliance level, because the value of each performance index depends on the use environment and user needs.
Some attributes may have ideal value ranges. These values depend on general factors such as human cognitive factors, rather than specific user needs. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 39360-2020
National Standard of the People's Republic of China
- ICS
- 25.040.30
- Classification
- K 32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Performance model of industrial robot control system
- 4.1 Overview
- 4.2 Performance model of industrial robot control system
- 5 Feature description
- 5.1 Ease of use
- 5.2 Maintainability
- 5.3 Functionality
- 5.4 Real-time
- 5.5 Scalability and openness
- 5.6 Reliability
- 5.7 Security
- 6 Test evaluation method
- 6.1 Overview
- 6.2 Ease of use test evaluation
- 6.3 Maintenance test evaluation
- 6.4 Functional test evaluation
- 6.5 Real-time test evaluation
- 6.6 Extensibility and openness test evaluation
- 6.7 Reliability test evaluation
- 6.8 Safety test evaluation
- 7 Test documentation set requirements
- 8 Compliance Evaluation Rules
- Appendix A (informative appendix) Robot operating system
1 Scope
This standard specifies the performance model, performance indicators, test evaluation methods, test documentation requirements and compliance of industrial robot control systems
Evaluation rules.
This standard applies to industrial robot control systems, and is available for industrial robot control system design developers, testers and evaluators
Staff and so on.
Note. This standard does not specify the measurement range to reach the assessment level or compliance level, because the value of each performance index depends on the use environment and user needs.
Some attributes may have ideal value ranges. These values depend on general factors such as human cognitive factors, rather than specific user needs.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 7826-2012 System Reliability Analysis Technology Failure Mode and Effect Analysis (FMEA) Procedure
GB/T 7829-1987 fault tree analysis program
GB 11291.1-2011 Safety requirements for robots used in industrial environments Part 1.Robots
GB/T 12642-2013 Industrial robot performance specifications and test methods
IEC 61025.2006 Fault Tree Analysis
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Industrial robot
Automatic control, reprogrammable multi-purpose operating machine, can program three or more axes, it can be fixed or mobile
Dynamic. Used in industrial automation.
Note 1.Industrial robots include.
---Operating machine, including brake;
--- Controller, including teach pendant and some communication interfaces.
Note 2.Including some integrated additional axis.
[GB/T 12643-2013, definition 2.9].
3.2 Interpolation
The process of data densification for a specific curve.
3.3 Communication
Information and data interaction between the machine control cabinet, the robot control cabinet and the body, and the robot and external equipment.
Note. The communication protocol of the robot includes Profibus, Ethernet, etc.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39360-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39360-2020
$300.00