GB/T 39334.5-2020Digital simulation of mechanical products manufacturing process—Part 5: Requirements of typical process simulation (English PDF)
机械产品制造过程数字化仿真 第5部分:典型工艺仿真要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39334.5-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
March 1, 2021
Scope
GB/T 39334.5-2020 is the English-translated version of 机械产品制造过程数字化仿真 第5部分:典型工艺仿真要求.
GB/T 39334.5-2020 is the Chinese standard "Digital simulation of mechanical products manufacturing process—Part 5: Requirements of typical process simulation".
Its scope clause reads: This part of GB/T 39334 specifies machining, assembly, sheet metal, welding, casting, forging, additive manufacturing in the manufacturing process of mechanical products The general requirements and basic processes of typical process simulations, as well as simulation plan formulation, simulation model construction, simulation operation analysis, result evaluation and Detailed requirements for optimization.
This section applies to applications, development, services and research related to typical process simulation in the manufacturing process of mechanical products. Its clauses include terms and definitions; general requirements; basic process.
Found what you need?
Document preview — GB/T 39334.5-2020
National Standard of the People's Republic of China
- ICS
- 01.100.01
- Classification
- J 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions1
- 4 General requirements1
- 5 Basic process1
- 6 Detailed requirements2
- 6.1 Machining process simulation2
- 6.2 Assembly process simulation2
- 6.3 Sheet metal process simulation5
- 6.4 Welding process simulation6
- 6.5 Casting process simulation8
- 6.6 Forging process simulation10
- 6.7 Simulation of additive manufacturing process12
1 Scope
This part of GB/T 39334 specifies machining, assembly, sheet metal, welding, casting, forging, additive manufacturing in the manufacturing process of mechanical products
The general requirements and basic processes of typical process simulations, as well as simulation plan formulation, simulation model construction, simulation operation analysis, result evaluation and
Detailed requirements for optimization.
This section applies to applications, development, services and research related to typical process simulation in the manufacturing process of mechanical products.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.
For undated references, the latest version (including all amendments) applies to this document.
GB/T 4863-2008 Basic terminology of mechanical manufacturing technology
GB/T 35022-2018 Main characteristics and test methods of additive manufacturing parts and powder raw materials
GB/T 39334.1 Digital Simulation of Mechanical Product Manufacturing Process Part 1.General Requirements
GB/T 39334.4 Digital Simulation of Mechanical Product Manufacturing Process Part 4.Requirements for Simulation of NC Machining Process
3 Terms and definitions
The terms and definitions defined in GB/T 4863-2008 and GB/T 39334.1 apply to this document.
4 General requirements
4.1
The simulation content includes, but is not limited to, the manufacturability, assemblability, effectiveness, accuracy, manufacturing process design of the product or part manufacturing process.
Manufacturing quality, etc.
4.2
The simulation model shall retain the information on the working characteristics of process equipment and process equipment.
4.3
Equipment, tooling, and tools should be able to adapt to the requirements of the process/work step operation content.
4.4
The virtual operator should have a reasonable perspective during the operation.
4.5
The simulation target should be determined according to the product or component manufacturing process. It can be an independent process process target or a multi-process phase.
Associated process goals, design simulation algorithms based on each process goal, and use process data or production data to drive simulation analysis.
4.6
Evaluation and optimization of simulation results can be repeated iteratively until a reasonable process design result is obtained.
5 Basic process
Typical process simulation usually includes four stages. simulation plan formulation, simulation model construction, simulation operation analysis, result evaluation and optimization (see
Figure 1), as follows.
a) Formulation of simulation plan. It should be based on the process plan, process route, simulation target, standard specification and data collection, such as product information,
Manufacturing resources and other information formulate a process simulation plan to verify the process design. In the simulation plan, the simulation platform […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39334.5-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 39334.4-2020 — Digital simulation of mechanical products manufacturing process—Part 4: Requirements of NC machining process simulation
GB/T 39334.3-2020 — Digital simulation of mechanical products manufacturing process—Part 3: Requirements of assembly workshop logistics simulation
GB/T 39334.2-2020 — Digital simulation of mechanical products manufacturing process—Part 2: Requirements of production line planning and layout simulation
GB/T 39334.5-2020
$240.00