GB/T 39285-2020Method for chemical analysis of palladium compounds - Determination of chlorine content - Ion chromatography (English PDF)
钯化合物分析方法 氯含量的测定 离子色谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39285-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
October 1, 2021
Scope
GB/T 39285-2020 is the English-translated version of 钯化合物分析方法 氯含量的测定 离子色谱法.
GB/T 39285-2020 is the Chinese standard "Method for chemical analysis of palladium compounds - Determination of chlorine content - Ion chromatography". Its scope clause reads: This standard specifies the method for determination of chlorine content in palladium compounds.
This standard applies to palladium compounds such as palladium nitrate, palladium sulfate, palladium acetate, tetrakis(triphenylphosphine)palladium, tris(dibenzylideneacetone)dipalladium, etc. containing chlorine Determination of the amount.
The measurement range is shown in Table 1. Table 1 Measuring range Sample mass fraction/% Palladium nitrate, palladium sulfate 0.00100~0.0300 Palladium acetate, tetrakis(triphenylphosphine)palladium, tris(dibenzylideneacetone)dipalladium 0.0100~0.500. Its clauses include method summary; reagent.
Found what you need?
Document preview — GB/T 39285-2020
National Standard of the People's Republic of China
- ICS
- 77.120.99
- Classification
- H 15
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Method summary
- 3 reagent
- 3.7 Absorbent solution
- 3.8 Chloride ion standard stock solution
- 3.9 Chloride ion standard solution
1 Scope
This standard specifies the method for determination of chlorine content in palladium compounds.
This standard applies to palladium compounds such as palladium nitrate, palladium sulfate, palladium acetate, tetrakis(triphenylphosphine)palladium, tris(dibenzylideneacetone)dipalladium, etc. containing chlorine
Determination of the amount. The measurement range is shown in Table 1.
Table 1 Measuring range
Sample mass fraction/%
Palladium nitrate, palladium sulfate 0.00100~0.0300
Palladium acetate, tetrakis(triphenylphosphine)palladium, tris(dibenzylideneacetone)dipalladium 0.0100~0.500
2 Method summary
Palladium nitrate and palladium sulfate are reduced with hydrazine hydrate to precipitate palladium in the compound, and the supernatant is used to determine the mass content of chlorine by ion chromatography
Count; palladium acetate, tetrakis (triphenylphosphine) palladium, and tris (dibenzylideneacetone) two palladium are pretreated with oxygen bomb combustion, and then absorbed by sodium carbonate-sodium bicarbonate solution
Collect, ion chromatograph to determine the mass fraction of chlorine.
3 reagent
Unless otherwise specified, only reagents confirmed to be pure superior grade and water of equivalent first grade purity are used in the analysis.
3.1
Sodium carbonate.
3.2
Sodium bicarbonate.
3.3
Sodium chloride (reference reagent).
3.4
Sodium hydroxide solution (80g/L).
3.5
Hydrazine hydrate (rho=1.03g/mL).
3.6
Eluent (3.2mmol/L sodium carbonate 1.0mmol/L sodium bicarbonate solution). weigh 0.3392g sodium carbonate (3.1) and 0.0840g carbon
Sodium bicarbonate (3.2) is dissolved by adding an appropriate amount of water, transferred to a 1000mL volumetric flask, diluted with water to the mark, and mixed. Or select according to the instrument column
Choose eluent.
3.7 Absorbent solution
same as eluent (3.6).
3.8 Chloride ion standard stock solution
Weigh 0.1649g of sodium chloride (3.3) which has been burnt to constant weight at 600°C, and place it in 100mL.
Add 10mL of water to the cup, heat at low temperature to dissolve completely, transfer to a 100mL volumetric flask, dilute to the mark with water, and mix. 1mL of this solution
Contains 1000µg chlorine.
3.9 Chloride ion standard solution
Pipette 5.00mL chloride ion standard stock solution (3.8), place it in a 100mL volumetric flask, and dilute it with water
Degree, mix well. This solution 1mL contains 50µg chlorine.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39285-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39285-2020
$105.00