Valid

GB/T 39234-2020Determination of phthalate esters in soil - Gas chromatography-mass spectrometry (GC-MS) (English PDF)

土壤中邻苯二甲酸酯测定 气相色谱-质谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39234-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 19, 2020

Implementation date

June 1, 2021

Scope

GB/T 39234-2020 is the English-translated version of 土壤中邻苯二甲酸酯测定 气相色谱-质谱法.

GB/T 39234-2020 is the Chinese standard "Determination of phthalate esters in soil - Gas chromatography-mass spectrometry (GC-MS)". Its scope clause reads: This standard specifies the gas chromatography-mass spectrometry (GC-MS) method for the determination of phthalates in soil.

This standard is applicable to the determination of 6 phthalate esters in soil, and the targets include. dimethyl phthalate, diethyl phthalate Esters, di-n-butyl phthalate, butyl benzyl phthalate, di(2-ethyl)hexyl phthalate, di-n-octyl phthalate.

For the determination of other phthalates, refer to use. The detection limit of this standard method for the determination of phthalates is 0.02mg/kg~0.07mg/kg, and the lower limit of determination is 0.08mg/kg~ 0.28mg/kg (see Appendix A). Its clauses include principle; reagents and materials.

Found what you need?

Document preview — GB/T 39234-2020

National Standard of the People's Republic of China

ICS
13.080
Classification
B 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope1
  • 2 Normative references1
  • 3 Principle1
  • 4 Reagents and materials1
  • 5 Apparatus and equipment2
  • 6 Sample2
  • 7 Analysis step3
  • 8 Test data processing4
  • 9 Precision and accuracy4
  • 10 Quality Control4
  • 11 Disposal of waste5
  • 12 Note5
  • Appendix A (Normative Appendix) The detection limit and lower limit of the method6
  • Appendix B (informative appendix) Reference parameters for determination of target compounds7
  • Appendix C (informative appendix) GC-MS selective ion chromatogram of phthalate ester standard material8
  • Appendix D (informative appendix) Precision and accuracy of the method9

1 Scope

This standard specifies the gas chromatography-mass spectrometry (GC-MS) method for the determination of phthalates in soil.

This standard is applicable to the determination of 6 phthalate esters in soil, and the targets include. dimethyl phthalate, diethyl phthalate

Esters, di-n-butyl phthalate, butyl benzyl phthalate, di(2-ethyl)hexyl phthalate, di-n-octyl phthalate.

For the determination of other phthalates, refer to use.

The detection limit of this standard method for the determination of phthalates is 0.02mg/kg~0.07mg/kg, and the lower limit of determination is 0.08mg/kg~

0.28mg/kg (see Appendix A).

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

HJ/T 166 Technical Specification for Soil Environmental Monitoring

HJ613 Soil dry matter and moisture determination gravimetric method

3 Principle

The phthalate ester in the soil sample is extracted by ultrasonic extraction method, and the extract is purified, concentrated, and fixed to volume by a chromatography column.

Spectrum separation, mass spectrometry detection. Using feature-selected ion monitoring scan mode (SIM), qualitatively based on the abundance ratio of fragment ions, and quantified standard samples

Quantitative ion external standard method.

4 Reagents and materials

Unless otherwise specified, only reagents and all glass confirmed to be chromatographically pure (or redistilled analytically pure, stored in glass bottles) are used in the analysis

Double distilled water.

4.1 n-hexane (C6H14)

chromatographically pure.

4.2

Acetone (C3H6O).

4.3 Anhydrous sodium sulfate (Na2SO4)

pure superior grade, bake in a muffle furnace at 400°C for 6 hours and then cool, and place it in a glass bottle in the desiccator for later use.

4.4 Silica gel

high-grade pure, 100 mesh ~.200 mesh, bake in a muffle furnace at 400 °C for 6 hours, then cool, and place it in a glass bottle in the desiccator for use.

4.5

Mixed solvent of n-hexane-acetone (1 1).

Mix with n-hexane (4.1) and acetone (4.2) in a volume ratio of 1.1.

4.6

Mixed solvent of n-hexane-acetone (4 1).

Mix with n-hexane (4.1) and acetone (4.2) in a volume ratio of 4.1.

4.7 Phthalates standard substance

purity >=98%.

4.8

Standard stock solution of phthalate ester (1000mg/L).

Weigh 10mg (accurate to 0.1mg) phthalate standard substance (4.7) into a 10mL volumetric flask, and use n-hexane (4.1) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39234-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39234-2020

$240.00