GB/T 39230-2020Code of practice for installation and commissioning of heavy duty submarine cable recovery and releasing device (English PDF)
重型海底电缆收放装置安装与调试规程
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39230-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
June 1, 2021
Scope
GB/T 39230-2020 is the English-translated version of 重型海底电缆收放装置安装与调试规程.
GB/T 39230-2020 is the Chinese standard "Code of practice for installation and commissioning of heavy duty submarine cable recovery and releasing device".
Its scope clause reads: This standard specifies the pre-installation preparation, installation quality requirements, installation process, inspection and commissioning (including navigation Debugging during debugging) etc. This standard applies to the installation and commissioning of heavy-duty submarine cable retractable devices laid horizontally or vertically.
Other submarine cable retractable devices can Refer to execution. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 39230-2020
National Standard of the People's Republic of China
- ICS
- 47.020.99
- Classification
- U 16
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Preparation before installation
- 4.1 File
- 4.2 People
- 4.3 Tooling
- 4.4 Installation conditions
- 5 Installation quality
- 5.1 Installation accuracy
- 5.2 Completeness
- 5.3 Weld quality
- 5.4 Fastness
- 5.5 Installation and grounding requirements of electrical equipment
- 6 Installation procedure
- 6.1 Installation of reel
- 6.2 Loading arm installation
- 6.3 Vertical tower installation
- 6.4 Installation of winch (initial winch, A/R winch)
- 6.5 Installation of deck crane
- 6.6 Installation of tensioner, cable routing frame, cable inlet trough and guide roller
- 7 Installation inspection
- 8 Debugging
- 8.1 General requirements
- 8.2 Mooring commissioning
- 8.3 Navigation Commissioning
- 8.4 Debugging data collation and report submission
- Appendix A (Informative Appendix) Mooring Commissioning Record Form
- Appendix B (informative appendix) Sailing and debugging data record table
1 Scope
This standard specifies the pre-installation preparation, installation quality requirements, installation process, inspection and commissioning (including navigation
Debugging during debugging) etc.
This standard applies to the installation and commissioning of heavy-duty submarine cable retractable devices laid horizontally or vertically. Other submarine cable retractable devices can
Refer to execution.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 34000 China Shipbuilding Quality Standard
GB 50661 Specification for Welding of Steel Structures
CB/T 3190-2019 Steel hull structure welding groove type and size
CB/T 3802 Surface quality inspection requirements for ship hull welds
CB/T 3909-2019 Ship electrical equipment installation process
CB/T 4231-2013 Technical requirements for ship coating
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Heavy-duty submarine cable retractable device
A device for storing, laying and recovering submarine cables with a cable storage capacity of not less than.2000t.
Note 1.The heavy-duty submarine cable retracting device generally consists of a cable reel, loading arm, initial winch, guide roller, tensioner, cable routing frame, A/R winch, and cable entry water
The trough and other equipment are mainly divided into horizontal laying and vertical laying.
Note 2.The horizontally laid heavy submarine cable retracting device is mainly composed of cable reel, loading arm, initial winch, guide roller, tensioner, cable routing frame, A/R twisting
It consists of vehicles, deck cranes, and cable entry tanks. The layout diagram is shown in Figure 1.
Note 3.The heavy-duty submarine cable retracting device for vertical laying is mainly composed of cable reel, loading arm, vertical tower, initial winch, guide roller, cable routing frame, and deck
It is composed of cranes, cable inlet tanks and other equipment. The vertical tower integrates tensioners, A/R winches, reversing wheels, service cranes and other equipment. The layout diagram is shown in Figure 2.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39230-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39230-2020
$360.00