Valid

GB/T 39213-2020Dredging track and profile monitor (English PDF)

疏浚轨迹与剖面显示系统

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39213-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 11, 2020

Implementation date

May 1, 2021

Scope

GB/T 39213-2020 is the English-translated version of 疏浚轨迹与剖面显示系统.

GB/T 39213-2020 is the Chinese standard "Dredging track and profile monitor". Its scope clause reads: This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and Store.

This standard is applicable to the design, manufacture, modification, maintenance and acceptance of trailing suction, cutter suction, grab dredger dredging trajectory and profile display system.

The bucket dredger can be used as reference. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 39213-2020

National Standard of the People's Republic of China

ICS
47.020.70
Classification
U 62

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Abbreviations
  • 5 Requirements
  • 5.1 Composition and interface
  • 5.2 Function
  • 5.3 Performance
  • 5.4 Appearance quality
  • 5.5 Shell protection
  • 6 Test method
  • 6.1 Function
  • 6.2 Performance
  • 6.3 Appearance quality
  • 6.4 Enclosure protection
  • 7 Inspection rules
  • 7.1 Inspection classification
  • 7.2 Type inspection
  • 7.3 Factory inspection
  • 8 Marking, packaging, transportation and storage
  • 8.1 Sign
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage
  • Appendix A (Normative Appendix) Data Package and File Format
  • Appendix B (informative appendix) Signal list
  • Appendix C (Normative Appendix) Functional Test Method
  • Appendix D (Normative Appendix) Performance Test Method

1 Scope

This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and

Store.

This standard is applicable to the design, manufacture, modification, maintenance and acceptance of trailing suction, cutter suction, grab dredger dredging trajectory and profile display system.

The bucket dredger can be used as reference.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 191-2008 Packaging, storage and transportation pictorial signs

GB/T 4099-2005 Commonly used terms of navigation and their codes (symbols)

GB/T 4208 Shell protection grade (IP code)

GB/T 11457-2006 Information Technology Software Engineering Terminology

GB/T 13384 General technical conditions for packaging of mechanical and electrical products

GB/T 17843-2007 Terminology for ships and marine technical dredgers

GB/T 28965-2012 Grab Dredger Dredging Monitoring System

GB/T 28966-2012 Cutter suction/bucket wheel dredger dredging monitoring system

GB/T 29135-2012 Trailing Suction Dredger Dredging Monitoring System

3 Terms and definitions

GB/T 4099-2005, GB/T 11457-2006, GB/T 17843-2007, GB/T 28965-2012, GB/T 28966-

2012, GB/T 29135-2012 and the following terms and definitions apply to this document.

3.1 Dredging trajectory

Operation traces of dredging excavators.

3.2 Dredging profile

The section of the dredging area perpendicular to the water surface.

3.3 Depth calculation point

The reference point for depth calculation of dredging excavators.

Note. The calculation point of cutter depth for cutter suction dredgers is the lower edge of the outer diameter of the cutter blade, the depth calculation point of the drag head for trailing suction dredgers is the lower edge of the fixed body of the drag head, and the grab dredger

The calculation point of the grab depth is the lower edge of the bucket lip.

3.4 Picture depth

The vertical distance of the depth calculation point relative to the base surface of the chart.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39213-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39213-2020

$300.00