Valid

GB/T 39210-2020Draught and soil loading system of hopper dredger (English PDF)

耙吸挖泥船吃水装载系统

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39210-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 11, 2020

Implementation date

May 1, 2021

Scope

GB/T 39210-2020 is the English-translated version of 耙吸挖泥船吃水装载系统.

GB/T 39210-2020 is the Chinese standard "Draught and soil loading system of hopper dredger". Its scope clause reads: This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of the draught loading system of trailing suction dredgers.

This standard is applicable to the design, manufacture, modification, maintenance and acceptance of the draught loading system of trailing suction dredgers. The draught loading system of mud barge can be used as reference.

Note. The abbreviation form of draught loading system is DSLS, which is used below. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 39210-2020

National Standard of the People's Republic of China

ICS
47.020.70
Classification
U 62

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope1
  • 2 Normative references1
  • 3 Terms and definitions1
  • 4 Requirements2
  • 4.1 Composition and interface2
  • 4.2 Function2
  • 4.3 Performance3
  • 4.4 Appearance quality3
  • 4.5 Environmental adaptability3
  • 4.6 Electromagnetic compatibility3
  • 4.7 Enclosure protection4
  • 4.8 Voltage and frequency4
  • 4.9 Insulation resistance4
  • 4.10 Insulation strength4
  • 5 Test method4
  • 5.1 Function4
  • 5.2 Performance4
  • 5.3 Appearance quality4
  • 5.4 Environmental adaptability4
  • 5.5 Electromagnetic compatibility4
  • 5.6 Enclosure protection4
  • 5.7 Voltage and frequency5
  • 5.8 Insulation resistance5
  • 5.9 Insulation strength5
  • 6 Inspection rules5
  • 6.1 Inspection classification5
  • 6.2 Type inspection5
  • 6.3 Factory inspection6
  • 7 Marking, packaging, transportation and storage6
  • 7.1 Mark6
  • 7.2 Packaging7
  • 7.3 Transportation7
  • 7.4 Storage7
  • Appendix A (Normative Appendix) Functional Test Method8
  • Appendix B (Normative Appendix) Performance Test Method12

1 Scope

This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of the draught loading system of trailing suction dredgers.

This standard is applicable to the design, manufacture, modification, maintenance and acceptance of the draught loading system of trailing suction dredgers. The draught loading system of mud barge can be used as reference.

Note. The abbreviation form of draught loading system is DSLS, which is used below.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 191-2008 Packaging, storage and transportation pictorial signs

GB/T 2423.1 Environmental testing of electrical and electronic products Part 2.Test method Test A. Low temperature

GB/T 2423.2 Environmental testing of electric and electronic products Part 2.Test method Test B. High temperature

GB/T 2423.3 Environmental Test Part 2.Test Method Test Cab. Constant Damp Heat Test

GB/T 2423.4 Environmental testing of electrical and electronic products Part 2.Test method Test Db. Alternating damp heat (12h 12h cycle)

GB/T 2423.10 Environmental Test Part 2.Test Method Test Fc. Vibration (Sine)

GB/T 2423.16-2008 Environmental testing of electric and electronic products Part 2.Test method Test J and guideline. Mould

GB/T 2423.17 Environmental testing of electrical and electronic products Part 2.Test method Test Ka. Salt spray

GB/T 2423.101 Environmental testing of electrical and electronic products Part 2.Test method Test. Tilt and swing

GB/T 4208 Shell protection grade (IP code)

GB/T 6587-2012 General Specification for Electronic Measuring Instruments

GB/T 13384 General technical conditions for packaging of mechanical and electrical products

GB/T 15479-1995 Technical requirements and test methods for insulation resistance and insulation strength of industrial automation instruments

GB/T 17626.2-2018 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test

GB/T 17626.3-2016 Electromagnetic compatibility test and measurement technology Radio frequency electromagnetic field radiation immunity test

GB/T 17626.4-2018 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test

GB/T 17626.5-2019 Electromagnetic compatibility test and measurement technology surge (impact) immunity test

GB/T 17626.11-2008 Electromagnetic compatibility test and measurement technology Voltage sag, short-term interruption and voltage change immunity test

GB/T 17843-2007 Terminology for ships and marine technical dredgers

GB/T 29135-2012 Trailing Suction Dredger Dredging Monitoring System

Rules for the Classification of Sea-going Steel Ships (2018) China Classification Society

3 Terms and definitions

The following terms and definitions defined in GB/T 17843-2007 and GB/T 29135-2012 apply to this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39210-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39210-2020

$240.00