GB/T 39207-2020Code of practice for installation and commissioning of anchor handling system (English PDF)
锚处理系统安装与调试规程
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39207-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2020
Implementation date
May 1, 2021
Scope
GB/T 39207-2020 is the English-translated version of 锚处理系统安装与调试规程.
GB/T 39207-2020 is the Chinese standard "Code of practice for installation and commissioning of anchor handling system". Its scope clause reads: This standard specifies the pre-installation preparation, installation quality, installation procedures, installation inspection and commissioning requirements of the anchor handling system.
This standard applies to the installation and commissioning of anchor handling systems. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 39207-2020
National Standard of the People's Republic of China
- ICS
- 47.020.99
- Classification
- U 16
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Preparation before installation
- 4.1 File
- 4.2 Personnel
- 4.3 Tooling, tools and equipment
- 4.4 Installation conditions
- 5 Installation quality
- 5.1 Installation accuracy
- 5.2 Completeness
- 5.3 Weld quality
- 5.4 Fastness
- 5.5 Tightness
- 6 Installation procedure
- 6.1 Anchor handling winch installation
- 6.2 Installation of chain guide
- 6.3 Installation of guide chain groove
- 6.4 Installation of tail drum
- 6.5 Installation of shark pliers and bollards
- 6.6 Installation of Anchor Chain Transfer Winch
- 6.7 Installation of hydraulic equipment, electrical equipment, pipelines, etc.
- 7 Installation inspection
- 8 Debug
- 8.1 Purpose of debugging
- 8.2 Debugging files
- 8.3 Instruments, instruments and tools for debugging
- 8.4 Debugger
- 8.5 Debugging environment
- 8.6 Debugging conditions
- 8.7 Debugging
- 8.8 Debugging data collation and report submission
- Appendix A (informative appendix) bolt torque reference table
- Appendix B (informative appendix) Commissioning record table
1 Scope
This standard specifies the pre-installation preparation, installation quality, installation procedures, installation inspection and commissioning requirements of the anchor handling system.
This standard applies to the installation and commissioning of anchor handling systems.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 34000 China Shipbuilding Quality Standard
GB 50661 Specification for Welding of Steel Structures
CB/T 3190-2019 Steel hull structure welding groove type and size
CB/T 3619 Ship system and power pipeline installation and tightness test quality requirements
CB/T 3802 Requirements for surface quality inspection of ship hull welds
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Anchor handling system
A system for other ships/platforms to perform anchoring and anchoring operations.
Note. The anchor handling system is composed of anchor handling winches, tail drums, shark clamps, bollards, chain guides, chain guide grooves, anchor chain transfer winches and other equipment. See the layout diagram figure 1.
3.2 Anchor handling winch
A winch that provides pulling force for other ships/platforms for anchoring and anchoring operations.
3.3 Shark pliers
Hold the wire rope or anchor chain tightly to the clamped equipment.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39207-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39207-2020
$240.00