Valid

GB/T 39206-2020Code of practice for installation and commissioning of fixed azimuth thruster (English PDF)

固定式全回转舵桨装置安装与调试规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (24 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39206-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 11, 2020

Implementation date

May 1, 2021

Scope

GB/T 39206-2020 is the English-translated version of 固定式全回转舵桨装置安装与调试规程.

GB/T 39206-2020 is the Chinese standard "Code of practice for installation and commissioning of fixed azimuth thruster".

Its scope clause reads: This standard specifies the pre-installation preparation, installation quality requirements, and installation procedures for fixed azimuth rudder propeller devices (hereinafter referred to as rudder propeller devices).

Sequence, installation inspection and debugging requirements. This standard applies to the installation and commissioning of electric propulsion gear-driven fixed azimuth rudder propellers.

Conventional power propulsion and integral pod The installation and commissioning regulations for the full-rotation rudder propeller device can be implemented by reference. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 39206-2020

National Standard of the People's Republic of China

ICS
47.020.99
Classification
U 16

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope1
  • 2 Normative references1
  • 3 Terms and definitions1
  • 4 Preparation before installation3
  • 4.1 File3
  • 4.2 Personnel3
  • 4.3 Tooling, tools and equipment3
  • 4.4 Environmental conditions3
  • 4.5 Installation conditions3
  • 5 Installation quality requirements4
  • 5.1 Installation accuracy requirements4
  • 5.2 Completeness4
  • 5.3 Weld quality4
  • 5.4 Tightness4
  • 5.5 Fastness4
  • 6 Installation procedure5
  • 6.1 Installation flowchart5
  • 6.2 Determine the reference point and the positioning mark of the rudder propeller device5
  • 6.3 Opening mounting holes5
  • 6.4 Hoisting of rudder propeller5
  • 6.5 Fixing the rudder propeller device6
  • 6.6 Intermediate shaft alignment6
  • 6.7 Promote motor alignment and installation6
  • 7 Installation inspection7
  • 8 Debug7
  • 8.1 General requirements7
  • 8.2 Mooring commissioning8
  • 8.2.1 Purpose of debugging8
  • 8.2.2 Debugging files8
  • 8.2.3 Instruments, instruments and tools for debugging8
  • 8.2.4 Debugger8
  • 8.2.5 Debugging environment8
  • 8.2.6 Debugging conditions8
  • 8.2.7 Debug9
  • 8.3 Navigation Commissioning12
  • 8.3.1 Purpose of debugging12
  • 8.3.2 Debugging files12
  • 8.3.3 Instruments, instruments and tools for debugging12
  • 8.3.4 Debugger12
  • 8.3.5 Debugging environment12
  • 8.3.6 Debugging conditions12
  • 8.3.7 Debugging12
  • Appendix A (Informative Appendix) Mooring Commissioning Record Form15
  • Appendix B (Informative Appendix) Voyage Commissioning Record Form21

1 Scope

This standard specifies the pre-installation preparation, installation quality requirements, and installation procedures for fixed azimuth rudder propeller devices (hereinafter referred to as rudder propeller devices).

Sequence, installation inspection and debugging requirements.

This standard applies to the installation and commissioning of electric propulsion gear-driven fixed azimuth rudder propellers. Conventional power propulsion and integral pod

The installation and commissioning regulations for the full-rotation rudder propeller device can be implemented by reference.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 3471 Sea-going ship mooring and navigation test general rules

GB/T 34000-2016 China Shipbuilding Quality Standard

CB/T 3190-2019 Steel hull structure welding groove type and size

CB/T 3558 Radiographic inspection process and quality classification of ship steel welds

CB/T 3559 Ultrasonic testing process and quality classification of ship steel welds

CB/T 3802 Requirements for surface quality inspection of ship hull welds

CB/T 3909-2019 Ship electrical equipment installation process

CB20112 Shipment equipment protection requirements

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Fixed full-rotation rudder propeller device

It is welded or bolted to install a propeller or duct propeller that can rotate 360° around a vertical axis and can provide a full range of thrust.

Note. Electric propulsion fixed azimuth rudder propeller devices can be divided into the following two types according to the layout.

a) Type L. The propulsion motor and the azimuth rudder propeller device are L-shaped power transmission methods.

The four parts of the gearbox and the underwater part are shown in Figure 1.

b) Type Z. The propulsion motor and the azimuth rudder propeller device are Z-shaped power transmission methods.

The four components of the gearbox and the underwater part are shown in Figure 2.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39206-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
24 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39206-2020

$420.00