GB/T 39203-2020Technical specifications for extraction of valuable metals from copper smelting dust (English PDF)
铜冶炼烟灰提取有价金属技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39203-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2020
Implementation date
May 1, 2021
Scope
GB/T 39203-2020 is the English-translated version of 铜冶炼烟灰提取有价金属技术规范.
GB/T 39203-2020 is the Chinese standard "Technical specifications for extraction of valuable metals from copper smelting dust". Its scope clause reads: This standard specifies the basic requirements, process flow and technical requirements for the extraction of valuable metals from copper smelting soot.
This standard applies to the extraction of valuable metals such as copper, cadmium, zinc, lead, and bismuth from soot produced by copper smelting enterprises during the pyrometallurgical copper smelting process.
This standard does not apply to the co-processing of soot and other materials to extract valuable metals. Its clauses include terms and definitions; basic requirements.
Found what you need?
Document preview — GB/T 39203-2020
National Standard of the People's Republic of China
- ICS
- 13.030.50
- Classification
- H 62
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions1
- 4 Basic requirements1
- 5 Process flow2
- 6 Technical requirements3
1 Scope
This standard specifies the basic requirements, process flow and technical requirements for the extraction of valuable metals from copper smelting soot.
This standard applies to the extraction of valuable metals such as copper, cadmium, zinc, lead, and bismuth from soot produced by copper smelting enterprises during the pyrometallurgical copper smelting process.
This standard does not apply to the co-processing of soot and other materials to extract valuable metals.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 467-2010 copper cathode
GB/T 469 lead ingot
GB/T 470 zinc ingot
GB/T 666 Chemical reagent zinc sulfate heptahydrate (zinc sulfate)
GB/T 915 Bismuth
GB 5085.7 General Rules for Identification Standards of Hazardous Wastes
GB 12348 Environmental Noise Emission Standard at the Boundary of Industrial Enterprises
GB 18597 Pollution Control Standard for Hazardous Waste Storage
GB 25466 Pollutant Emission Standard for Lead and Zinc Industry
GB 25467 Pollutant Emission Standard for Copper, Nickel and Cobalt Industry
HG/T 2326 Industrial zinc sulfate
HJ863.3 Pollutant Discharge Permit Application and Issuance Technical Specification Non-ferrous Metal Industry---Copper Smelting
YS/T 72 Cadmium Ingot
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Copper smelting soot
The material collected by the dust collection system of the process flue gas generated in the copper smelting process such as smelting, blowing, and pyrometallurgy.
4 Basic requirements
4.1
The storage of copper smelting soot should meet the requirements of GB 18597.
4.2
The discharge of pollutants during the extraction of valuable metals from copper smelting soot should meet the requirements of HJ863.3.
4.3
The waste gas produced in the process of extracting valuable metals from copper smelting soot should meet the requirements of GB 25466 and GB 25467.
4.4
The waste water generated during the extraction of valuable metals from copper smelting soot should be collected and treated for reuse or discharged in compliance with standards to prevent secondary pollution.
4.5
The solid waste generated during the extraction of valuable metals from copper smelting soot should be identified in accordance with GB 5085.7.
Those with hazardous characteristics shall be managed as general industrial solid wastes, comprehensive utilization shall be given priority, and corresponding prevention and control measures shall be taken during the collection and storage process.
If it is identified as hazardous waste, harmless disposal measures shall be adopted.
4.6
The noise during the extraction of valuable metals from copper smelting soot should meet the requirements of GB 12348.
4.7
The process of extracting valuable metals from copper smelting soot should comply with relevant national and industry regulations and standards on quality, safety, hygiene, and fire protection.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39203-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39203-2020
$150.00