Valid

GB/T 39184-2020Code of practice for installation and commissioning of ROV launch and recovery system/umbilical winch (English PDF)

ROV收放装置/脐带绞车安装与调试规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39184-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 11, 2020

Implementation date

May 1, 2021

Scope

GB/T 39184-2020 is the English-translated version of ROV收放装置/脐带绞车安装与调试规程.

GB/T 39184-2020 is the Chinese standard "Code of practice for installation and commissioning of ROV launch and recovery system/umbilical winch".

Its scope clause reads: This standard specifies the pre-installation preparation, installation quality requirements, installation process, and installation process of ROV (remote controlled unmanned submersible Inspection and commissioning regulations (including commissioning in sea trials), etc. This standard applies to the installation and commissioning of ROV retractable devices with fixed retractable hangers and umbilical winches. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 39184-2020

National Standard of the People's Republic of China

ICS
47.020.99
Classification
U 16

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope1
  • 2 Normative references1
  • 3 Terms and definitions1
  • 4 Preparation before installation3
  • 4.1 File3
  • 4.2 Personnel4
  • 4.3 Tooling and tools4
  • 4.4 Installation conditions4
  • 5 Installation quality requirements4
  • 5.1 Installation accuracy requirements4
  • 5.2 Completeness5
  • 5.3 Weld quality5
  • 5.4 Fastness5
  • 5.5 Tightness6
  • 6 Installation procedure6
  • 6.1 Installation flowchart6
  • 6.2 Positioning datum6
  • 6.3 Installation of umbilical winch6
  • 6.4 ROV retractable hanger installation6
  • 6.5 Guide pulley installation7
  • 6.6 Hydraulic equipment installation7
  • 6.7 Installation of electrical equipment7
  • 7 Installation inspection8
  • 8 Debug8
  • 8.1 Mooring debugging8
  • 8.2 Navigation Commissioning10
  • 8.3 Admission and processing of commissioning data11
  • Appendix A (Informative Appendix) Mooring Commissioning Record Form12
  • Appendix B (Informative Appendix) Voyage Commissioning Record Form13

1 Scope

This standard specifies the pre-installation preparation, installation quality requirements, installation process, and installation process of ROV (remote controlled unmanned submersible

Inspection and commissioning regulations (including commissioning in sea trials), etc.

This standard applies to the installation and commissioning of ROV retractable devices with fixed retractable hangers and umbilical winches.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.

For undated references, the latest version (including all amendments) applies to this document.

GB/T 34000 China Shipbuilding Quality Standard

GB 50661 Specification for Welding of Steel Structures

CB/T 3190-2019 Steel hull structure welding groove type and size

CB/T 3619 Ship system and power pipeline installation and tightness test quality requirements

CB/T 3802 Requirements for surface quality inspection of ship hull welds

CB/T 3909-2019 Ship electrical equipment installation process

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 ROV retractable device/umbilical winch

ROV retractable device with umbilical winch.

3.2 ROV retractable device

A complete set of equipment used to lower the ROV into the water and return it to the ship.

Note. Mainly include ROV retractable hanger, ROV umbilical winch, ROV umbilical cable guide pulley, hydraulic pump station, etc.

3.3 ROV retractable hanger

Hanger device used to lift ROV retractable.

Note. According to its form, it is mainly divided into three types.

a) Single lifting point type, used for side or stern retractable;

b) Sliding travel type, used for side retraction;

c) Moonpool orbit type, used for moonpool retractable.

A typical schematic diagram of a single-point-type retractable hanger is shown in Figure 1, a typical schematic diagram of a sliding-travel type retractable hanger is shown in Figure 2, and a typical schematic diagram of a moonpool track-type retractable hanger is shown in Figure 3.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39184-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39184-2020

$240.00