GB/T 39182-2020Installation specifications for household and similar heat pump water heater (English PDF)
家用和类似用途热泵热水器安装规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39182-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2020
Implementation date
May 1, 2021
Scope
GB/T 39182-2020 is the English-translated version of 家用和类似用途热泵热水器安装规范.
GB/T 39182-2020 is the Chinese standard "Installation specifications for household and similar heat pump water heater". Its scope clause reads: This standard specifies the classification, installation requirements and wiring requirements for household and similar heat pump water heaters (hereinafter referred to as "heat pump water heaters").
Request, inspection and acceptance, etc. This standard is applicable to homes driven by electric motors, using vapor compression refrigeration cycles, using air or water as the heat source to provide hot water.
Installation, trial operation and acceptance of heat pump water heaters for use and similar purposes. Other heat sources or heat pump water heaters can be used as reference.
Home The relocation installation, maintenance disassembly and assembly of heat pump water heaters shall be implemented in accordance with this standard. This standard does not apply to industrial heat pump water heaters. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 39182-2020
National Standard of the People's Republic of China
- ICS
- 97.030
- Classification
- Y 63
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions1
- 4 Category2
- 5 Installation requirements2
- 6 Wiring requirements8
- 7 Inspection and acceptance10
1 Scope
This standard specifies the classification, installation requirements and wiring requirements for household and similar heat pump water heaters (hereinafter referred to as "heat pump water heaters").
Request, inspection and acceptance, etc.
This standard is applicable to homes driven by electric motors, using vapor compression refrigeration cycles, using air or water as the heat source to provide hot water.
Installation, trial operation and acceptance of heat pump water heaters for use and similar purposes. Other heat sources or heat pump water heaters can be used as reference. Home
The relocation installation, maintenance disassembly and assembly of heat pump water heaters shall be implemented in accordance with this standard.
This standard does not apply to industrial heat pump water heaters.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.
For undated references, the latest version (including all amendments) applies to this document.
GB/T 700 carbon structural steel
GB/T 1002 Single-phase plug and socket type, basic parameters and dimensions for household and similar purposes
GB/T 2099.1 Household and similar plugs and sockets Part 1.General requirements
GB 4706.1 Safety of household and similar electrical appliances Part 1.General requirements
GB 4706.12 Special requirements for safe storage water heaters for household and similar electrical appliances
GB 4706.32 Special requirements for safety heat pumps, air conditioners and dehumidifiers for household and similar electrical appliances
GB/T 5013 (all parts) rubber insulated cables with rated voltages of 450/750V and below
GB/T 5780 Hexagon head bolts Class C
GB/T 14093.1 Environmental technical requirements for mechanical products
GB/T 17219 Safety evaluation standard for drinking water distribution equipment and protective materials
GB 17790-2008 Installation specification for household and similar air conditioners
GB/T 18742.3 Polypropylene piping system for hot and cold water Part 3.Fittings
GB/T 23137 Household and similar heat pump water heaters
GB/T 36932-2018 General requirements for installation and wiring of household and similar electrical appliances
GB 50169 Code for construction and acceptance of grounding devices for electrical installations
3 Terms and definitions
The following terms and definitions defined in GB 4706.32, GB/T 23137 and GB 17790-2008 apply to this document.
3.1 Mounting surface
Support and fix the heat pump water heater tank and host, the stress surface of the integral heat pump water heater, mostly refers to the wall, ground and top surface of the building.
3.2 Mount
A device capable of reliably fixing the heat pump water heater on the installation surface.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 39182-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 39182-2020
$240.00