Valid

GB/T 39158-2020High purity copper rotatable tube target for flat panel display (English PDF)

平面显示用高纯铜旋转管靶

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39158-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 19, 2020

Implementation date

October 1, 2021

Scope

GB/T 39158-2020 is the English-translated version of 平面显示用高纯铜旋转管靶.

GB/T 39158-2020 is the Chinese standard "High purity copper rotatable tube target for flat panel display".

Its scope clause reads: This standard specifies the terms and definitions, classification, technical requirements, test methods, inspection rules, signs, and Packaging, transportation, storage, quality certificate and purchase order (or contract) content.

This standard is applicable to 4N, 4N5, 5N high-purity copper rotating tube target products of various specifications for flat display. Its clauses include terms and definitions; categories.

Found what you need?

Document preview — GB/T 39158-2020

National Standard of the People's Republic of China

ICS
77.150.30
Classification
H 62

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 categories

1 Scope

This standard specifies the terms and definitions, classification, technical requirements, test methods, inspection rules, signs, and

Packaging, transportation, storage, quality certificate and purchase order (or contract) content.

This standard is applicable to 4N, 4N5, 5N high-purity copper rotating tube target products of various specifications for flat display.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.

For undated references, the latest version (including all amendments) applies to this document.

GB/T 1804-2000 General Tolerance Tolerance of linear and angular dimensions without tolerance

GB T5121.27 Methods for chemical analysis of copper and copper alloys-Part 27.Inductively coupled plasma atomic emission spectrometry

GB/T 8170 Numerical rounding rules and the expression and determination of limit values

GB/T 14265 General rules for analysis methods of hydrogen, oxygen, nitrogen, carbon and sulfur in metallic materials

YS/T 347 Copper and copper alloy average grain size determination method

YS/T 922 Chemical analysis method for high purity copper. Determination of trace impurity element content. Glow discharge mass spectrometry

YS/T 1000-2014 Ultrasonic longitudinal wave flaw detection method for copper and copper alloy pipes

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Rotating tube target

A tubular target material used in the flat panel display field.

Note. Mainly used for electronic thin film deposition.

3.2 Surface roughness

Ra

The processing surface has small spacing and small peak and valley unevenness. The average arithmetic deviation value Ra of the profile, that is, at a certain measurement length l

Within the range, the average arithmetic deviation of the absolute value of the distance y from each point on the contour to the center line. Expressed by the following formula.

4 categories

The product grades are classified into three grades. RCu-4N, RCu-4N5, and RCu-5N according to their purity. Product specifications can be divided into phi155×438, phi155×

888, phi155×1091, phi155×888, phi167×2490.The corresponding specifications of different grades are shown in Table 1.

Example. A rotating copper target with a copper content of 99.995% is represented as RCu-4N5.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39158-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39158-2020

$105.00