GB/T 39143-2020Methods for chemical analysis of gold-arsenic alloys - Determination of arsenic content - Inductively coupled plasma atomic emission spectrometry (English PDF)
金砷合金化学分析方法 砷含量的测定 电感耦合等离子体原子发射光谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39143-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2020
Implementation date
September 1, 2021
Scope
GB/T 39143-2020 is the English-translated version of 金砷合金化学分析方法 砷含量的测定 电感耦合等离子体原子发射光谱法.
GB/T 39143-2020 is the Chinese standard "Methods for chemical analysis of gold-arsenic alloys - Determination of arsenic content - Inductively coupled plasma atomic emission spectrometry".
Its scope clause reads: This standard specifies the method for determination of arsenic content in gold-arsenic alloys. This standard applies to the determination of arsenic content in gold-arsenic alloys.
Measuring range. 0.10%~3.00%. Its clauses include principle; reagents and materials; instruments; sample; test procedure.
Found what you need?
Document preview — GB/T 39143-2020
National Standard of the People's Republic of China
- ICS
- 77.120.99
- Classification
- H 15
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Principle
- 3 Reagents and materials
- 4 Instruments
- 5 Sample
- 6 Test procedure
1 Scope
This standard specifies the method for determination of arsenic content in gold-arsenic alloys.
This standard applies to the determination of arsenic content in gold-arsenic alloys. Measuring range. 0.10%~3.00%.
2 Principle
The sample was dissolved in a mixed acid of hydrochloric acid and nitric acid, and measured with an inductively coupled plasma atomic emission spectrometer to calculate the mass fraction of arsenic.
3 Reagents and materials
Unless otherwise specified, only the pure reagents and deionized water confirmed to be superior grade are used in the analysis.
3.1
Hydrochloric acid (rho1.19g/mL).
3.2
Nitric acid (rho1.42g/mL).
3.3
Hydrochloric acid (1 1).
3.4 Mixed acid
Mix 3 volumes of hydrochloric acid (3.1) and 1 volume of nitric acid (3.2), and prepare them when used.
3.5 Arsenic standard storage solution
Weigh 0.1320g of arsenic trioxide (reference reagent, pre-placed in a concentrated sulfuric acid dryer to dry to constant weight)
In a 100mL beaker, add 10mL sodium hydroxide solution (200g/L) to dissolve, cool, transfer to a 100mL volumetric flask, add 10mL
Hydrochloric acid (3.1), dilute to the mark with water, and mix well. This solution 1mL contains 1000µg arsenic.
3.6 Arsenic standard solution
accurately pipette 10.00mL arsenic standard stock solution (3.5) into a 100mL volumetric flask, add 10mL hydrochloric acid (3.1) Dilute to the mark with water and mix well. This solution 1mL contains 100µg arsenic.
3.7
Argon (volume fraction >=99.99%).
4 Instruments
Inductively coupled plasma atomic emission spectrometer. Under the best conditions of the instrument, it can be used where the following indicators can be achieved.
---Resolution. The optical resolution at.200nm is not greater than 0.008nm; the optical resolution at 400nm is not greater than 0.020nm.
---Instrument stability. Under the best working conditions of the instrument, measured 11 times with 1.0µg/mL copper standard solution, and its emission intensity
The relative standard deviation does not exceed 2.0%.
5 Sample
Process the sample into chips not larger than 1mm.
6 Test procedure
6.1 Sample
Weigh 0.10g sample, accurate to 0.0001g.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39143-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39143-2020
$90.00