GB/T 39137-2020Determination for the orientation of refractory metal single crystal (English PDF)
难熔金属单晶晶向测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39137-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2020
Implementation date
September 1, 2021
Scope
GB/T 39137-2020 is the English-translated version of 难熔金属单晶晶向测定方法.
GB/T 39137-2020 is the Chinese standard "Determination for the orientation of refractory metal single crystal". Its scope clause reads: This standard specifies the X-ray diffraction method to determine the angle between the crystal orientation of the cubic refractory metal single crystal and the surface normal of the macroscopic sample.
This standard is applicable to the determination of the angle between the crystal orientation of the cubic refractory metal single crystal and the normal direction of the surface of the macroscopic sample. Its clauses include terms and definitions; principle; equipment.
Found what you need?
Document preview — GB/T 39137-2020
National Standard of the People's Republic of China
- ICS
- 77.040.20
- Classification
- H 26
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
- 5 Equipment
1 Scope
This standard specifies the X-ray diffraction method to determine the angle between the crystal orientation of the cubic refractory metal single crystal and the surface normal of the macroscopic sample.
This standard is applicable to the determination of the angle between the crystal orientation of the cubic refractory metal single crystal and the normal direction of the surface of the macroscopic sample.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 8170 Numerical rounding rules and the expression and determination of limit values
Technical conditions of JB/T 9400 X-ray diffractometer
JY/T 009 General rules of multi-crystal X-ray diffraction method for rotating target
3 Terms and definitions
The following terms and definitions defined in JY/T 009 apply to this document.
3.1
phi axis
The axis on which the sample stage rotates around the normal to the sample surface.
3.2
omega angle
The angle between the incident X-ray and the sample surface.
3.3
omega scan
Continuously change the omega angle and record the measurement mode of the diffraction intensity.
4 Principle
The cross-section or cutting surface of the single crystal will deviate from a certain low-index crystal plane by a few degrees. The deviation angle is the single crystal crystal orientation and macro
Observe the normal angle (off angle) of the sample surface.
When a beam of X-rays is incident on the crystal plane of the index, the index in the crystal represents a set of atomic structures that are parallel to each other and equally spaced.
When the optical path difference between adjacent planes satisfies the Bragg equation, diffraction will occur. At this time, the incident X-ray and the crystal plane
The included angle is called the Bragg angle and is denoted as thetaB. Use a counter to detect the diffraction line, and determine the direction of the crystal plane according to the position where it appears, and
The deviation of the crystal plane from the cross section or cut surface can be calculated by the azimuth relationship between this direction and the normal direction of the sample surface.
5 Equipment
5.1
The X-ray diffractometer is composed of X-ray source, parallel light accessories, sample stage, and detector, and should meet the requirements of JB/T 9400.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39137-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39137-2020
$90.00