Valid

GB/T 39123-2020Specification for cadmium-zinc telluride single crystal material for X-ray and gamma-ray detector (English PDF)

X射线和γ射线探测器用碲锌镉单晶材料规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39123-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 11, 2020

Implementation date

September 1, 2021

Scope

GB/T 39123-2020 is the English-translated version of X射线和γ射线探测器用碲锌镉单晶材料规范.

GB/T 39123-2020 is the Chinese standard "Specification for cadmium-zinc telluride single crystal material for X-ray and gamma-ray detector".

Its scope clause reads: This standard specifies the technical requirements, quality assurance regulations and delivery preparations for X-ray and gamma-ray detectors for cadmium zinc telluride single crystal materials.

This standard applies to single crystal materials of cadmium zinc telluride for X-ray and gamma-ray detectors. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 39123-2020

National Standard of the People's Republic of China

ICS
07.030
Classification
Q 65

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Requirements
  • 5 Test method
  • 6 Inspection rules
  • 7 Packaging, labeling, transportation and storage
  • 8 Explanation

1 Scope

This standard specifies the technical requirements, quality assurance regulations and delivery preparations for X-ray and gamma-ray detectors for cadmium zinc telluride single crystal materials.

This standard applies to single crystal materials of cadmium zinc telluride for X-ray and gamma-ray detectors.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 1555 Method for determination of crystal orientation of semiconductor single crystals

GB/T 6618 Silicon wafer thickness and total thickness change test method

GB/T 14264 Terminology of Semiconductor Materials

GB/T 24576 High-resolution X-ray diffraction test method for measuring Al composition in AlGaAs grown on GaAs substrate

GB/T 29505 Method for measuring surface roughness of flat surface of silicon wafer

GB/T 32188 X-ray double crystal rocking curve half-width test method for gallium nitride monocrystalline substrate

3 Terms and definitions

The following terms and definitions defined in GB/T 14264 apply to this document.

3.1 Cadmium Zinc Telluride Single Crystal

A solid solution alloy with a zinc blende structure can be regarded as a solid solution of cadmium telluride (CdTe) and zinc telluride (ZnTe); its molecular formula is

Note. As the content x of the Zn component changes, its lattice constant also changes; it is mainly used for room temperature X-ray and gamma-ray detectors, and mercury cadmium telluride thin

The epitaxial substrate of the film.

3.2 Component x value

The content of Zn component in cadmium zinc telluride single crystal can be regarded as the molar ratio of zinc telluride (ZnTe) to cadmium zinc telluride (CdZnTe).

3.3 Microprecipitation phase

Affected by the temperature field distribution and segregation effect, the granular micro-precipitation phase of cadmium and tellurium may be formed during the growth of cadmium zinc telluride crystals.

Not more than 100µm, which has a greater impact on the crystal quality.

3.4 Leakage current

In the absence of radiation and high voltage, a stable current through the cadmium zinc telluride crystal.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39123-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39123-2020

$210.00