GB/T 39097-2020Technical requirements for deepwater positioning and mooring system (English PDF)
深水定位系泊系统技术要求
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39097-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2020
Implementation date
April 1, 2021
Scope
GB/T 39097-2020 is the English-translated version of 深水定位系泊系统技术要求.
GB/T 39097-2020 is the Chinese standard "Technical requirements for deepwater positioning and mooring system". Its scope clause reads: This standard specifies the composition and classification, technical requirements and test methods of deepwater positioning mooring systems.
This standard applies to deep-water positioning mooring systems for offshore floating installations with a water depth of not more than 1500m (hereinafter referred to as positioning mooring systems) Design, manufacturing and testing.
Its clauses include terms and definitions; system composition and classification.
Found what you need?
Document preview — GB/T 39097-2020
National Standard of the People's Republic of China
- ICS
- 47.020.50
- Classification
- U 21
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions1
- 4 System composition and classification1
- 5 Technical requirements2
- 6 Test method7
- Appendix A (informative appendix) Environmental conditions, loads and forms of movement9
- Appendix B (informative appendix) Positioning mooring system analysis method15
1 Scope
This standard specifies the composition and classification, technical requirements and test methods of deepwater positioning mooring systems.
This standard applies to deep-water positioning mooring systems for offshore floating installations with a water depth of not more than 1500m (hereinafter referred to as positioning mooring systems)
Design, manufacturing and testing.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 3893 Shipbuilding and offshore structure deck machinery terms and symbols
GB/T 8918 Wire Rope for Important Use
GB/T 11787 Fiber rope polyester 3 strands, 4 strands, 8 strands and 12 strands
GB/T 20848 mooring chain
CB/T 3179 anchor chain wheel
APISpec2F Specification for Mooring Chain (Specification for Mooring Chain)
3 Terms and definitions
The following terms and definitions defined in GB/T 3893 apply to this document.
3.1 Deepwater positioning and mooring system
The assembly of windlass/anchor winch equipment, electric control system, hydraulic system (if any) and accessory parts for deep water positioning and mooring.
3.2 Rated load normalload
When the windlass/anchor winch retracts the anchor rope at the rated speed, the maximum value that can be continuously maintained is measured at the outlet of the anchor sprocket or the rope outlet of the working layer of the drum.
Great pull.
3.3 Rated speed normalspeed
The maximum speed that the anchor chain or wire rope can maintain when the anchor chain or wire rope is subjected to the rated load at the rope outlet of the anchor sprocket wheel or the working layer of the drum.
3.4 Support load holdingload
When the windlass/anchor winch is stopped by the brake, the maximum static that can be maintained is measured at the outlet of the anchor sprocket or the working layer of the drum.
pull.
4 System composition and classification
4.1 System composition
The positioning mooring system consists of the following components and equipment.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39097-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39097-2020
$360.00