Valid

GB/T 39004-2020Industrial robot electromagnetic compatibility design specification (English PDF)

工业机器人电磁兼容设计规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39004-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 29, 2020

Implementation date

April 1, 2021

Scope

GB/T 39004-2020 is the English-translated version of 工业机器人电磁兼容设计规范.

GB/T 39004-2020 is the Chinese standard "Industrial robot electromagnetic compatibility design specification". Its scope clause reads: This standard specifies the electromagnetic compatibility (EMC) design of the teaching pendant, control cabinet, robot body, and printed circuit board (PCB) of industrial robots.

Plan requirements. This standard applies to the EMC design of industrial robots. Note.

The content given in this standard is a kind of approaching design, when the industrial robot manufacturer adopts the following design, it will get better electromagnetic compatibility. when When there is a conflict between this standard and other design requirements, the manufacturer should adopt the best design method according to the actual situation and comprehensive consideration. Its clauses include terms, definitions and abbreviations.

Found what you need?

Document preview — GB/T 39004-2020

National Standard of the People's Republic of China

ICS
25.040.30
Classification
J 28

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope1
  • 2 Normative references1
  • 3 Terms, definitions and abbreviations1
  • 3.1 Terms and definitions1
  • 3.2 Abbreviations3
  • 4 Industrial robot composition and key components of electromagnetic compatibility3
  • 4.1 Overview3
  • 4.2 Teach Pendant4
  • 4.3 Control cabinet4
  • 4.4 Industrial robot body4
  • 5 EMC design framework for industrial robots4
  • 6 Teach Pendant5
  • 6.1 Overview5
  • 6.2 Technical index requirements for electromagnetic compatibility of teach pendant5
  • 6.3 EMC design requirements for teach pendant6
  • 7 Control cabinet8
  • 7.1 Overview8
  • 7.2 EMC design requirements for control cabinet system8
  • 7.3 EMC design requirements for key components in the control cabinet11
  • 8 Industrial robot body13
  • 8.1 Overview13
  • 8.2 EMC design of industrial robot body system13
  • 8.3 EMC design requirements for key components in the body13
  • 9 PCB electromagnetic compatibility design of industrial robot14
  • 9.1 Overview14
  • 9.2 EMC design based on the PCB schematic part14
  • 9.3 PCB layout EMC design16
  • 10 Verification method18
  • 10.1 Electromagnetic compatibility test method18
  • 10.2 Design process record18
  • Appendix A (informative appendix) Key elements of EMC design of industrial robots19

1 Scope

This standard specifies the electromagnetic compatibility (EMC) design of the teaching pendant, control cabinet, robot body, and printed circuit board (PCB) of industrial robots.

Plan requirements.

This standard applies to the EMC design of industrial robots.

Note. The content given in this standard is a kind of approaching design, when the industrial robot manufacturer adopts the following design, it will get better electromagnetic compatibility. when

When there is a conflict between this standard and other design requirements, the manufacturer should adopt the best design method according to the actual situation and comprehensive consideration.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 4365 Electrotechnical terminology electromagnetic compatibility

GB 4824-2019 Industrial, scientific and medical equipment radio frequency disturbance characteristic limits and measurement methods

GB/T 6113.201 Specification for radio disturbance and immunity measuring equipment and measurement methods Part 2-1.Radio disturbance and immunity

Degree measurement method Conducted disturbance measurement

GB/T 6113.203 Specification for radio disturbance and immunity measurement equipment and measurement methods Part 2-3.Radio disturbance and immunity

Degree measurement method radiated disturbance measurement

GB/T 12643-2013 Robot and Robot Equipment Vocabulary

GB/T 17626.2 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test

GB/T 17626.3 Electromagnetic compatibility test and measurement technology Radio frequency electromagnetic field radiation immunity test

GB/T 17626.4 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test

GB/T 17626.5 Electromagnetic compatibility test and measurement technology surge (impact) immunity test

GB/T 17626.6 Electromagnetic compatibility test and measurement technology Radio frequency field induced conducted disturbance immunity

GB/T 17626.11 Electromagnetic compatibility test and measurement technology Voltage sag, short-term interruption and voltage change immunity test

GB/T 17626.14-2005 Electromagnetic compatibility test and measurement technology Voltage fluctuation immunity test

GB/T 17799.2 Electromagnetic compatibility general standard industrial environment immunity test

GB/T 38326 Industrial, scientific and medical robot electromagnetic compatibility immunity test

GB/T 38336 Electromagnetic compatibility emission test methods and limits for industrial, scientific and medical robots

3 Terms, definitions and abbreviations

3.1 Terms and definitions

The following terms and definitions defined in GB/T 4365 and GB/T 12643-2013 apply to this document.

3.1.1 Industrialrobot

The automatic control, repeatable programming, multi-purpose operating machine can program three or more axes. It can be fixed or

Mobile. Used in industrial automation.

Note 1.Industrial robots include.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39004-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39004-2020

$360.00