GB/T 38918-2020Civil airplane landing gear structure design and simulation (English PDF)
民用飞机起落架结构设计与仿真
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38918-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 2, 2020
Implementation date
January 1, 2021
Scope
GB/T 38918-2020 is the English-translated version of 民用飞机起落架结构设计与仿真.
GB/T 38918-2020 is the Chinese standard "Civil airplane landing gear structure design and simulation". Its scope clause reads: This standard specifies the basic requirements, detailed requirements, and simulation requirements for civil aircraft landing gear structure design.
This standard applies to civil aircraft landing gear (hereinafter referred to as landing gear) structural design and simulation, other aircraft can refer to use. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 38918-2020
National Standard of the People's Republic of China
- ICS
- 49.020
- Classification
- V 05
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Basic requirements
- 4.1 Overview
- 4.2 Overall layout
- 4.3 Structure
- 4.4 Structural Bearing
- 4.5 Material selection
- 4.6 Maintainability
- 5 Detailed requirements
- 5.1 Buffer design
- 5.2 Receiving mechanism
- 6 Simulation
- 6.1 General requirements
- 6.2 Simulation content
- 6.3 Evaluation of simulation results
1 Scope
This standard specifies the basic requirements, detailed requirements, and simulation requirements for civil aircraft landing gear structure design.
This standard applies to civil aircraft landing gear (hereinafter referred to as landing gear) structural design and simulation, other aircraft can refer to use.
2 Normative references
The following documents are essential for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
China Civil Aviation Regulations Part 25 (Airworthiness Standards for Transport Aircraft) (CCAR25) Order of the Ministry of Transport of the People's Republic of China.2016
No. 19
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Landing gear
The device used for aircraft take-off, landing, ground taxiing and parking, generally consists of support structure, buffer, retracting mechanism, turning mechanism, wheel
Brake device and other components.
3.2 Landing gear structure
Landing gear components used to bear and transfer aircraft ground loads are generally composed of landing gear struts, buffers, frame, axles, struts, and retractors
It consists of release mechanism, turning mechanism, lock mechanism, hydraulic actuator and other components.
3.3 Shock absorber
The device used for the landing gear to absorb the sinking impact energy of the aircraft during the aircraft taking off and landing and taxiing.
3.4 Stroke
The amount of buffer compression.
3.5 Rebound damper recoilsnubber
A damper installed in the buffer to control the extension speed of the landing gear.
3.6 Downlock
When the landing gear is in the down position, a mechanism or device for locking the landing gear.
3.7 Uplock
When the landing gear is in the retracted position, the mechanism or device for locking the landing gear.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38918-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38918-2020
$210.00