GB/T 38851-2020Information technology—Identification cards—General technical requirements for integrated fingerprint identification card (English PDF)
信息技术 识别卡 集成指纹的身份识别卡通用技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38851-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 21, 2020
Implementation date
February 1, 2021
Scope
GB/T 38851-2020 is the English-translated version of 信息技术 识别卡 集成指纹的身份识别卡通用技术要求.
GB/T 38851-2020 is the Chinese standard "Information technology—Identification cards—General technical requirements for integrated fingerprint identification card".
Its scope clause reads: This standard specifies the basic composition, appearance and structure, and mechanical fitness of fingerprint-integrated identification cards (hereinafter referred to as fingerprint identification cards).
Compliance, environmental adaptability, electrical characteristics and transmission protocols, general procedures and basic functional performance, commands, information security and other requirements.
This standard is applicable to the development, production, inspection and use of fingerprint identification cards.
Found what you need?
Document preview — GB/T 38851-2020
National Standard of the People's Republic of China
- ICS
- 35.240.15
- Classification
- L 64
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions2
- 4 Abbreviations3
- 5 Basic composition3
- 6 Appearance and structure3
- 7 Mechanical adaptability4
- 7.1 Flexural toughness4
- 7.2 Dynamic bending stress4
- 7.3 Dynamic torsion stress4
- 7.4 Mechanical strength4
- 7.5 Scratch resistance4
- 8 Environmental adaptability4
- 8.1 Limits of restricted substances4
- 8.2 Chemical resistance5
- 8.3 Card dimensional stability and warpage under temperature and humidity conditions5
- 8.4 Light5
- 8.5 Peel strength5
- 8.6 Adhesion or block5
- 8.7 Full card warpage5
- 8.8 Heat resistance5
- 8.9 Surface distortion5
- 8.10 Interaction between pollution and card components5
- 8.11 Ultraviolet5
- 8.12 X-ray5
- 8.13 Static magnetic field5
- 8.14 Alternating magnetic field5
- 8.15 Static electricity5
- 9 Electrical characteristics and transmission protocol6
- 10 General process and basic functions, performance requirements6
- 10.1 General process6
- 10.2 Basic functional requirements7
- 10.3 Basic performance requirements7
- 11 Command8
- 12 Information Security8
- 12.1 General requirements8
- 12.2 Fingerprint collection and processing security8
- 12.3 Fingerprint storage security9
- 12.4 Fingerprint comparison security9
- Appendix A (informative appendix) ID-1 specification fingerprint identification card face layout10
1 Scope
This standard specifies the basic composition, appearance and structure, and mechanical fitness of fingerprint-integrated identification cards (hereinafter referred to as fingerprint identification cards).
Compliance, environmental adaptability, electrical characteristics and transmission protocols, general procedures and basic functional performance, commands, information security and other requirements.
This standard is applicable to the development, production, inspection and use of fingerprint identification cards.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 14916-2006 Identification card physical characteristics
GB/T 16649.1-2006 Identification Card IC Card with Contacts Part 1.Physical Characteristics
GB/T 16649.2 Identification Card IC Cards with Contacts Part 2.Contact Size and Position
GB/T 16649.3 Identification card IC card with contacts-Part 3.Electrical signal and transmission protocol
GB/T 16649.10 Identification card IC card with contacts-Part 10.Synchronous card electrical signal and response to reset
GB/T 16649.11-2019 Identification Card Integrated Circuit Card Part 11.Identity Verification by Biometric Identification Method
GB/T 17554.1-2006 Identification Card Test Method Part 1.General Characteristic Test
GB/T 17554.3-2006 Identification Card Test Method Part 3.Integrated Circuit Cards with Contacts and Related Interface Equipment
GB/T 26237.1 Information Technology Biometric Data Exchange Format Part 1.Framework
GB/T 26237.2 Information Technology Biometric Data Exchange Format Part 2.Fingerprint Minutiae Data
GB/T 26237.3 Information Technology Biometric Data Exchange Format Part 3.Fingerprint Spectrum Data
GB/T 26237.4 Information Technology Biometric Data Exchange Format Part 4.Fingerprint Image Data
GB/T 26572-2011 Limit requirements for restricted substances in electrical and electronic products
GB/T 26704-2011 pencil
GB/T 33767.1-2017 Information Technology Biometric Sample Quality Part 1.Framework
ISO /IEC 10373-3 Identification Card Test Method Part 3.Integrated Circuit Cards with Contacts and Related Interface Equipment (Iden- tificationcards-Testmethods-Part 3.Integratedcircuitcardswithcontactsandrelatedinterfacede- vices)
ISO /IEC 10373-6 Identification card test method Part 6.Proximity card (Identificationcards-Test methods-Part 6.Proximitycards)
ISO /IEC 10373-7 Identification card test method Part 7.Proximity card (Identificationcards-Test methods-Part 7.Vicinitycards)
ISO /IEC 14443 (all parts) identification card contactless integrated circuit card close to card type (Identificationcards-
Contactlessintegratedcircuitcards-Proximitycards)
ISO /IEC 30107 (all parts) Information technology biometrics presents attack detection (Informationtechnology-
Biometricpresentationattackdetection) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38851-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38851-2020
$195.00