Valid

GB/T 38642-2020Industrial robot life cycle risk assessment methods (English PDF)

工业机器人生命周期风险评价方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (35 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38642-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 28, 2020

Implementation date

November 1, 2020

Scope

GB/T 38642-2020 is the English-translated version of 工业机器人生命周期风险评价方法.

GB/T 38642-2020 is the Chinese standard "Industrial robot life cycle risk assessment methods".

Its scope clause reads: This standard stipulates the basic principles, risk evaluation procedures and document requirements of the life cycle risk assessment method of industrial robots, and gives Examples of industrial robot hazard identification, AGV hazard identification, risk assessment and risk reduction.

This standard applies to the life cycle risk assessment of industrial robots. The safety principles established in this standard can be used by other types of robots.

Exam use. This standard does not include the risk assessment of industrial robot system integration. For special applications (welding, laser cutting, machining, etc.)

Can produce additional hazards, these hazards should be targeted for risk assessment. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 38642-2020

National Standard of the People's Republic of China

ICS
25.040.30
Classification
J 28

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword I
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Basic principles
  • 4.1 Risk assessment and risk reduction strategies
  • 4.2 Risk reduction objective
  • 5 Risk Evaluation Procedure
  • 5.1 General provisions
  • 5.2 Identify risk assessment objects
  • 5.3 The establishment of a risk assessment working group
  • 5.4 Collect relevant information of the evaluation object
  • 5.5 Division of life cycle and division of hazardous areas
  • 5.6 Risk assessment
  • 5.7 Issuing a risk assessment report
  • 5.8 Risk reduction
  • 6 File
  • Appendix A (informative appendix) Industrial Robot (excluding AGV) Hazard Source Identification
  • Appendix B (Informative Appendix) AGV Hazard Source Identification
  • Appendix C (informative appendix) Examples of risk assessment and risk reduction
  • References

1 Scope

This standard stipulates the basic principles, risk evaluation procedures and document requirements of the life cycle risk assessment method of industrial robots, and gives

Examples of industrial robot hazard identification, AGV hazard identification, risk assessment and risk reduction.

This standard applies to the life cycle risk assessment of industrial robots. The safety principles established in this standard can be used by other types of robots.

Exam use.

This standard does not include the risk assessment of industrial robot system integration. For special applications (welding, laser cutting, machining, etc.)

Can produce additional hazards, these hazards should be targeted for risk assessment.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB 11291.1-2011 Safety requirements for robots for industrial environments Part 1. Robots

GB 11291.2 Robots and robot equipment Safety requirements for industrial robots Part 2. Robot systems and integration

GB/T 15706-2012 General principles of machinery safety design risk assessment and risk reduction

GB/T 16855.1-2018 Safety related parts of machinery safety control system Part 1. General rules for design

GB/T 16856-2015 Machinery Safety Risk Assessment Implementation Guidelines and Method Examples

GB 28526-2012 Safety of machinery electrical safety related functional safety of electrical, electronic and programmable electronic control systems

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Industrialrobot

Automatically controlled, reprogrammable, multi-purpose operator can program three or more axes. It can be fixed or

Mobile. Used in industrial automation.

Note 1. Industrial robots include.

--- Operator, including actuator;

--- Controller, including teaching box and some communication interfaces (hardware and software).

Note 2. This includes some integrated additional axes.

[GB/T 12643-2013, definition 2.9]

3.2 Adequate risk reduction

At least meet the requirements of laws and regulations and consider the risk reduction of the existing technical level.

Note. The criteria for determining whether the risk is sufficiently reduced are given in 5.6.2 of GB/T 15706-2012.

[GB/T 15706-2012, definition 3.18] […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 35 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38642-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
35 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38642-2020

$530.00