GB/T 38614-2020Measuring method for nano positioning and scanning stage based on flexible hinge mechanism and piezo actuator (English PDF)
基于柔性铰链机构和压电陶瓷驱动器的纳米定位与扫描平台测量方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38614-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 28, 2020
Implementation date
November 1, 2020
Scope
GB/T 38614-2020 is the English-translated version of 基于柔性铰链机构和压电陶瓷驱动器的纳米定位与扫描平台测量方法.
GB/T 38614-2020 is the Chinese standard "Measuring method for nano positioning and scanning stage based on flexible hinge mechanism and piezo actuator".
Its scope clause reads: This standard specifies the measurement of nanopositioning and scanning platform (hereinafter referred to as platform) based on flexible hinge mechanism and piezoelectric ceramic driver Measurement conditions, measurement systems and measurement methods.
This standard applies to the research, design, production, testing and use of the platform. Its clauses include terms and definitions; measurement conditions; measuring instruments; measurement methods.
Found what you need?
Document preview — GB/T 38614-2020
National Standard of the People's Republic of China
- ICS
- 01.040.39
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Measurement conditions
- 5 Measuring instruments
- 6 Measurement method
- 6.1 Axial stroke
- 6.2 Accuracy
- 6.3 One-way repeated positioning accuracy
- 6.4 Bidirectional repeat positioning accuracy
- 6.5 Hysteresis error
- 6.6 Linearity
- 6.7 Displacement resolution
- 6.8 Angle pendulum deviation
- 6.9 Straightness
- 6.10 Flatness
- 6.11 Quadrature error
1 Scope
This standard specifies the measurement of nanopositioning and scanning platform (hereinafter referred to as platform) based on flexible hinge mechanism and piezoelectric ceramic driver
Measurement conditions, measurement systems and measurement methods.
This standard applies to the research, design, production, testing and use of the platform.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 11336 2004 straightness error detection
GB/T 38616-2020 Terminology for nanopositioning and scanning platform
3 Terms and definitions
The terms and definitions defined in GB/T 38616-2020 apply to this document.
4 Measurement conditions
The platform measurement should meet the following conditions.
a) The measurement site should be free of dust, vibration, airflow disturbance and strong magnetic field that affect the measurement accuracy;
b) The ambient temperature during measurement is (20 ± 1) °C, and its change should not be greater than 0.5 °C/h;
c) The relative humidity of the environment during the measurement is (50 ± 5)%;
d) Before the measurement, confirm that the platform has no appearance defects that affect the correctness of the measurement and the measurement results;
e) The platform is in normal working state during measurement.
5 Measuring instruments
It is recommended to use a laser interferometer (hereinafter referred to as interferometer) in this standard, and the auto-collimator can also be used for angular deviation.
Full measurement requirements.
6 Measurement methods
6.1 Axial travel
6.1.1 Measurement procedure
Align the interferometer strictly to the platform, and perform the axial stroke measurement according to the following steps.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38614-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38614-2020
$240.00