Valid

GB/T 38594-2020Water supply devices with superimposing pipe pressure (English PDF)

管网叠压供水设备

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38594-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 31, 2020

Implementation date

February 1, 2021

Scope

GB/T 38594-2020 is the English-translated version of 管网叠压供水设备.

GB/T 38594-2020 is the Chinese standard "Water supply devices with superimposing pipe pressure".

Its scope clause reads: This standard specifies the terms and definitions of the pipe network superimposed water supply equipment (hereinafter referred to as "equipment"), equipment composition, classification, model marking and use Conditions of use, requirements, test methods, inspection rules, signs, packaging, transportation and storage.

This standard applies to the design, manufacture and inspection of pipe network water supply equipment.

Found what you need?

Document preview — GB/T 38594-2020

National Standard of the People's Republic of China

ICS
91.140.60
Classification
P 41

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Equipment composition, classification, model marking and conditions of use
  • 4.1 Composition
  • 4.2 Storage device
  • 4.3 Classification
  • 4.4 Type designation
  • 4.5 Conditions of use
  • 5 Requirement
  • 5.1 General requirements
  • 5.2 Appearance
  • 5.3 Performance requirements
  • 5.4 Operation control requirements
  • 5.5 Operation monitoring and protection
  • 5.6 Control cabinet
  • 5.7 Water pump unit
  • 5.8 Piping system
  • 5.9 Pneumatic tank
  • 5.10 Low-level storage tank
  • 5.11 High and low water storage tank
  • 5.12 Compensation pump
  • 6 Test method
  • 6.1 General requirements
  • 6.2 Visual inspection
  • 6.3 Performance requirements check
  • 6.4 Operation control test
  • 6.5 Operation monitoring and protection test
  • 6.6 Control cabinet test
  • 6.7 Pump unit
  • 6.8 Inspection of piping system
  • 6.9 Air pressure tank inspection
  • 6.10 Low-level storage tank inspection
  • 6.11 High and low water storage tank inspection
  • 6.12 Checking the compensation pump
  • 7 Inspection rules
  • 7.1 Inspection classification
  • 7.2 Factory inspection
  • 7.3 Type inspection
  • 8 Marking, packaging, transportation and storage
  • 8.1 Logo
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage

1 Scope

This standard specifies the terms and definitions of the pipe network superimposed water supply equipment (hereinafter referred to as "equipment"), equipment composition, classification, model marking and use

Conditions of use, requirements, test methods, inspection rules, signs, packaging, transportation and storage.

This standard applies to the design, manufacture and inspection of pipe network water supply equipment.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 150.1 Pressure vessel Part 1. General requirements

GB/T 150.2 Pressure Vessel Part 2. Materials

GB/T 150.3 Pressure Vessel Part 3. Design

GB/T 150.4 Pressure Vessel Part 4. Manufacturing, Inspection and Acceptance

GB/T 191 Icon mark for packaging, storage and transportation

GB/T 755 rotating motor rating and performance

GB/T 2423.1 Environmental testing for electrical and electronic products Part 2. Test methods Test A. Low temperature

GB/T 2423.2 Environmental Test for Electrical and Electronic Products Part 2. Test Method Test B. High Temperature

GB/T 2423.3 Environmental Test Part 2. Test Method Test Cab. Constant Damp Heat Test

GB/T 2423.10 Environmental testing for electrical and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)

GB/T 2816 well submersible pump

GB/T 2818 Submersible asynchronous motor for well

GB/T 3214 Measuring method of pump flow

GB/T 3216 Hydraulic Performance Acceptance Test of Rotary Power Pump Level 1, Level 2 and Level 3

GB/T 3797-2016 Electrical control equipment

GB/T 4208 enclosure protection level (IP code)

GB/T 5657 Technical Conditions of Centrifugal Pump (Class III)

GB/T 12771 Stainless steel welded steel pipe for fluid transportation

GB/T 13306 sign

GB/T 13384 General technical requirements for packaging of electromechanical products

GB/T 14976 Stainless steel seamless steel pipe for fluid transportation

GB/T 17219 Safety Evaluation Standards for Drinking Water Distribution Equipment and Protective Materials

GB 18613 Energy efficiency limit value and energy efficiency rating for small and medium-sized three-phase asynchronous motors

GB 19762 energy efficiency limit value and energy saving evaluation value of clean water centrifugal pump

GB/T 29529-2013 Pump noise measurement and evaluation method

GB 50015 Building Water Supply and Drainage Design Code

GB 50242 Code for Construction Quality Acceptance of Building Water Supply, Drainage and Heating Engineering

CJ/T 352 microcomputer control frequency conversion speed regulation water supply equipment […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38594-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38594-2020

$355.00