Valid

GB/T 38552-2020Code of practice for the safe use of mast climbing work platforms (English PDF)

导架爬升式工作平台安全使用规程

Preview PDF

This is a limited preview

Buy now to download the full PDF (35 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38552-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 6, 2020

Implementation date

October 1, 2020

Scope

GB/T 38552-2020 is the English-translated version of 导架爬升式工作平台安全使用规程.

GB/T 38552-2020 is the Chinese standard "Code of practice for the safe use of mast climbing work platforms".

Its scope clause reads: This standard specifies the safety of power-driven guide-frame climbing work platforms (hereinafter referred to as MCWPs) for people to work on Use requirements, including installation, disassembly, maintenance and comprehensive inspection.

This standard applies to the climbing work platform where the operating platform is lifted by the drive system and guided and guided by the guide frame.

This standard does not include the following. a) Caused by the manipulation, installation or disassembly, fixing or removal of any material or equipment that is not part of the MCWP Danger; b) treatment of specific hazardous materials; c) Transport personnel and materials to fixed floors, such as elevators and elevators defined in GB 7588, EN81-43 and GB/T 25856 Construction lifts as defined by GB/T 10054.1 and GB/T 26557; d) Mobile lift working platforms (MEWPs) defined by GB/T 25849, window cleaners defined by GB/T 19154, GB/T 19155 defines high-level working gondola, EN1570 defines the lifting platform and GB 28755 defines the simple lift. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 38552-2020

National Standard of the People's Republic of China

ICS: 53.020
Classification: J 80

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword III
1 Scope
2 Normative references
3 Terms and definitions
4 Dangers associated with MCWP operations
5 MCWP supplier management and control
6 Management and control of MCWP operation
7 Staff and training
8 Installation planning
9 MCWP in place
10 MCWP installation, modification and removal
11 MCWP operation, use, maintenance and inspection
12 Comprehensive inspection and testing of MCWP
13 Construction site safety
Appendix A (informative) Typical pre-use check and weekly checklist
Appendix B (informative) Typical comprehensive checklist
Appendix C (Normative Appendix) Scope and Content of Comprehensive Inspection
References

1 Scope

This standard specifies the safety of power-driven guide-frame climbing work platforms (hereinafter referred to as MCWPs) for people to work on

Use requirements, including installation, disassembly, maintenance and comprehensive inspection.

This standard applies to the climbing work platform where the operating platform is lifted by the drive system and guided and guided by the guide frame.

This standard does not include the following.

a) Caused by the manipulation, installation or disassembly, fixing or removal of any material or equipment that is not part of the MCWP Danger;

b) treatment of specific hazardous materials;

c) Transport personnel and materials to fixed floors, such as elevators and elevators defined in GB 7588, EN81-43 and GB/T 25856

Construction lifts as defined by GB/T 10054.1 and GB/T 26557;

d) Mobile lift working platforms (MEWPs) defined by GB/T 25849, window cleaners defined by GB/T 19154,

GB/T 19155 defines high-level working gondola, EN1570 defines the lifting platform and GB 28755 defines the simple lift.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 27547-2011 Lifting work platform guide frame climbing work platform

3 terms and definitions

The terms and definitions defined in GB/T 27547-2011 and the following apply to this document. For ease of use, the following is repeated

Some terms and definitions in GB/T 27547-2011.

3.1 Mastclimbingworkplatform; MCWP

Driven aisle system that provides movable aisles for personnel working at high structures. It consists of the following four parts.

a) at least one guide frame that can be used to climb and support the work platform;

b) a working platform capable of carrying personnel, equipment, tools and materials under safe working loads;

c) a chassis or wheeled chassis with a support guide structure;

Note 1. The chassis or chassis can provide stability for the MCWP below a predetermined independent height. When it is exceeded, the guide frame must be attached to the building or other structure.

Thing.

d) Attachment.

Note 2. The mobile MCWP does not require an attachment frame.

Note 3. Figure 1 shows a single guide MCWP. Figure 2 is a dual guide MCWP. For the convenience of illustration, the figure is a fixed chassis and a mobile

Type of chassis. Figure 3 shows a typical attachment frame.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 35 pages — is available in the English PDF.

Similar standards

GB/T 9465-2018|GB/T 3811-2008|GB/T 26474-2026|GB/T 27546-2026|GB/T 27997-2026|GB/T 47720-2026

How to Download GB/T 38552-2020

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.