GB/T 38355-2019Matrix quality management mode for success right the first time (English PDF)
一次成功矩阵式质量管理模式
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38355-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2019
Implementation date
July 1, 2020
Scope
GB/T 38355-2019 is the English-translated version of 一次成功矩阵式质量管理模式.
GB/T 38355-2019 is the Chinese standard "Matrix quality management mode for success right the first time". Its scope clause reads: This standard specifies the methods to achieve a successful one using a matrix quality management model.
This standard is applicable to organizations that undertake innovative, new fields, multiple varieties, multiple stages, multiple suppliers, high complexity, high cost, and high risk products. Its clauses include terms and definitions; mode.
Found what you need?
Document preview — GB/T 38355-2019
National Standard of the People's Republic of China
- ICS
- 03.120.10
- Classification
- A 00
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword III
- Introduction IV
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Mode
- 4.1 General
- 4.2 Organizational Quality Management
- 4.3 Implementation of Product Warranty
- 4.4 Product implementation process
- 5 run
- 5.1 General
- 5.2 Resources
- 5.3 Institution
- 5.4 Planning
- 5.5 Implementation
- 5.6 Monitoring, measurement, analysis and evaluation
- 5.7 Improvement
- 6 Tools
- 6.1 General
- 6.2 Tool category
- 6.3 System Maturity Evaluation
- 6.4 Quality supervision acceptance
- 6.5 Quality audit
- 6.6 "One-time success" technical guarantee
- 6.7 Quality Intersection Analysis
- 6.8 Quality Positive Confirmation
- 6.9 Quantitative Evaluation of Product Assurance
- 6.10 Quality Education and Training
- Appendix A (informative) Project (product) assurance flowchart
- Appendix B (informative) Matrix Quality Management Model Toolkit
1 Scope
This standard specifies the methods to achieve a successful one using a matrix quality management model.
This standard is applicable to organizations that undertake innovative, new fields, multiple varieties, multiple stages, multiple suppliers, high complexity, high cost, and high risk products.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 19000 Quality Management System Foundation and Terminology
GB/T 19001 Quality Management System Requirements
GB/T 29076 Implementation Requirements for Zeroing the Quality of Aerospace Products
GB/T 37708 Guidelines for successful data envelope analysis of quality management products
3 terms and definitions
The terms and definitions defined in GB/T 19000 and the following apply to this document.
3.1 Matrixqualitymanagement
The quality management model is based on the organization's quality management as horizontal, product assurance as vertical, and projects (products) as "connection points" and "implementation points".
3.2 General qualitycharacteristic
Characterize that the product has a stable working state and technical performance throughout the life cycle, and the characteristics that meet the actual use requirements are affecting the product
An important factor in effectiveness.
Note. "General quality characteristics" mainly include product reliability, maintainability, testability, supportability, safety and environmental adaptability.
3.3 Productassurance
A series of planned and organized processes to ensure that customers and interested parties meet product requirements
Technical and management activities.
Note. The "product guarantee" in this standard mainly includes standardization guarantee, product quality guarantee, general quality characteristic guarantee, component guarantee, software guarantee, and measurement guarantee.
Certificates and materials, mechanical parts and process assurance.
3.4 Success once the first time
With the goal of comprehensively meeting customer requirements and taking a systematic engineering management method as a means, in the process of project realization, the work quality meets the requirements.
The design is in place once, the manufacturing is qualified, and the verification is successful.
Continue to improve.
4 mode
4.1 General
The core of the matrix quality management model is the application of management tools.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38355-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38355-2019
$355.00