Valid

GB/T 38352-2019Thermoplastic elastomers—Designation and specification for premixture (English PDF)

热塑性弹性体 预混料牌号规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38352-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2019

Implementation date

November 1, 2020

Scope

GB/T 38352-2019 is the English-translated version of 热塑性弹性体 预混料牌号规范.

GB/T 38352-2019 is the Chinese standard "Thermoplastic elastomers—Designation and specification for premixture". Its scope clause reads: This standard specifies the principles and format requirements for the preparation of thermoplastic elastomer premix grades.

This standard applies to thermoplastic elastomer premixes. Its clauses include branding principles; format requirements.

Found what you need?

Document preview — GB/T 38352-2019

National Standard of the People's Republic of China

ICS
83.060
Classification
G 35

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Branding principles
  • 4 Format requirements

1 Scope

This standard specifies the principles and format requirements for the preparation of thermoplastic elastomer premix grades.

This standard applies to thermoplastic elastomer premixes.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 22027 Thermoplastic Elastomer Nomenclature and Acronyms

3 Branding principles

3.1

The expression of thermoplastic elastomer premix grades should be concise and general.

And feature information, you can add some additional information if necessary.

3.2

When two or more synthetic thermoplastic elastomers are used as a base material to produce a premix, the letter of the base material category with the largest mass fraction

It is the category letter of the premixed grade; when there are two or more substrates and the mass fraction is the same, the substrate category letters are ordered by the English alphabet

In order, the letter of the first substrate category is the category letter of the premix grade.

3.3

The category letters shall meet the requirements of GB/T 22027.

Note. The category letter A represents polyamide-based thermoplastic elastomer, C represents copolyester-based thermoplastic elastomer, O represents olefin-based thermoplastic elastomer, and S generation

Table styrene-based thermoplastic elastomers, U for urethane-based thermoplastic elastomers, V for thermoplastic vulcanizates, Z for unclassified other

He thermoplastic elastomer.

4 Format requirements

The grade of the thermoplastic elastomer premix generally consists of 8 characters;

The first character. category letter information of synthetic thermoplastic elastomers. The category letters should comply with the provisions of GB/T 22027.

The second character. indicates the processing method, 1 for extrusion, 2 for injection molding, 3 for both extrusion and injection molding, and 4 for blow molding.

The third and fourth characters. the hardness value.

The fifth character. indicates the Shore hardness unit, A stands for Shore A, D stands for Shore D.

The sixth character. indicates the color, black is B, white is W, natural color is N, transparent is T, and other is O.

The seventh and eight characters. feature information added by each company.

There is a need to add ninth and tenth company characteristic symbols.

The thermoplastic elastomer premix grades have the following format.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38352-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38352-2019

$85.00