Valid

GB/T 38337-2019General specification for ultrasonic motor and driver (English PDF)

超声波电动机及其驱动控制器通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (24 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38337-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 10, 2019

Implementation date

July 1, 2020

Scope

GB/T 38337-2019 is the English-translated version of 超声波电动机及其驱动控制器通用技术条件.

GB/T 38337-2019 is the Chinese standard "General specification for ultrasonic motor and driver".

Its scope clause reads: This standard specifies the terms and definitions, classifications, operating conditions, technical requirements and test methods of ultrasonic motors and their drive controllers, Inspection rules, delivery preparation and quality assurance period.

This standard applies to rotary ultrasonic motors (hereinafter referred to as "ultrasonic motors") and their drive controllers (hereinafter referred to as "drivers"), Refer to the linear ultrasonic motor and its drive controller for reference.

Found what you need?

Document preview — GB/T 38337-2019

National Standard of the People's Republic of China

ICS
29.160.30
Classification
K 24

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword I
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Classification and basic parameters
  • 5 Operating conditions
  • 6 Technical requirements and test methods
  • 7 Inspection rules
  • 8 Preparation for delivery
  • 9 Quality Assurance Period
  • Appendix A (informative) Model designation of rotary ultrasonic motors
  • Appendix B (Informative) Model Nomenclature Method for Rotary Ultrasonic Motor Drivers
  • Appendix C (Normative Appendix) Rotary Ultrasonic Motor Basic Outline Structure Type
  • Appendix D (Normative Appendix) Standard Test Stands and Fixtures for Rotary Ultrasonic Motors

1 Scope

This standard specifies the terms and definitions, classifications, operating conditions, technical requirements and test methods of ultrasonic motors and their drive controllers,

Inspection rules, delivery preparation and quality assurance period.

This standard applies to rotary ultrasonic motors (hereinafter referred to as "ultrasonic motors") and their drive controllers (hereinafter referred to as "drivers"),

Refer to the linear ultrasonic motor and its drive controller for reference.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 755-2008 quota and performance of rotating electrical machines

GB/T 1804-2000 Tolerances for linear and angular dimensions without general tolerances

GB/T 2423.1 Environmental test for electric and electronic products Part 2. Test method Test A. Low temperature

GB/T 2423.2 Environmental tests for electric and electronic products. Part 2. Test methods Test B. High temperature

GB/T 2423.3 Environmental test Part 2. Test method Test Cab. Constant humidity test

GB/T 2423.4 Environmental test for electric and electronic products Part 2. Test method Test Db. Alternating damp heat (12h 12h cycle)

GB/T 2423.5 Environmental tests Part 2. Test methods Test Ea and guidelines. Impact

GB/T 2423.10 Environmental test Part 2. Test method Test Fc. Vibration (sine)

GB/T 2423.16 Environmental testing for electric and electronic products. Part 2. Test methods Test J and guide. Chang mold

GB/T 2423.17 Environmental test for electric and electronic products Part 2. Test methods Test Ka. Salt spray

GB/T 2828.1-2012 Counting sampling inspection procedures Part 1. Batch inspection sampling retrieved by acceptance quality limit (AQL) plan

GB/T 2900.25 Electrical term for rotating electrical machines

GB/T 2900.26 Electrical term control motor

GB/T 5171.1 Low-power motors Part 1. General technical requirements

GB/T 5171.21-2016 Low-power motors Part 21. General test methods

GB/T 6113.203 Specifications for radio disturbance and immunity measuring equipment and methods Part 2-3. Radio disturbance and immunity

Radiation disturbance measurement

GB/T 6113.204 Specifications for radio disturbance and immunity measuring equipment and methods Part 2-4. Radio disturbance and immunity

Measurement method

GB/T 7345-2008 Basic technical requirements for control motors

GB/T 7346 basic outline structure type of control motor

GB/T 10069.1 Measuring methods and limits for noise from rotating electrical machines. Part 1. Measuring methods for noise from rotating electrical machines

GB/T 16439-2009 General technical requirements for AC servo systems

GB 17799.3 General standards for electromagnetic compatibility Emissions in residential, commercial and light industrial environments

GB 17799.4 Emissions in general electromagnetic standard industrial environment […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38337-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
24 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38337-2019

$465.00