GB/T 38166-2019Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron (English PDF)
钢板搪瓷、铝搪瓷和铸铁搪瓷的样板制备
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38166-2019 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
October 18, 2019
Implementation date
May 1, 2020
Scope
GB/T 38166-2019 is the English-translated version of 钢板搪瓷、铝搪瓷和铸铁搪瓷的样板制备.
GB/T 38166-2019 — This standard specifies the preparation method of the enamel template used for the test. This standard applies to two different templates, including. ---Product model; ---Special model.
This standard applies to the preparation of steel plate enamel, aluminum enamel and cast iron enamel. Note. When quantitatively determining the mass loss of enamel surface per unit area, only special samples can be used. The sample from the product will reduce the accuracy of the test method.
Found what you need?
Document preview — GB/T 38166-2019
National Standard of the People's Republic of China
- ICS
- 25.220.50
- Classification
- Y 26
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 marked
- 4 product template
- 4.1 Product Model Requirements
- 4.2 Shape and size requirements
- 4.3 Preparation
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the redrafting method to modify the use of ISO 28764.2015 "enamel and enamel steel enamel, aluminum enamel and cast iron 搪
Porcelain sample preparation.
The technical differences between this standard and ISO 28764.2015 and their reasons are as follows.
---5.1.1 The shape and size requirements of the special sample are increased. "Other test methods are specified for the sample. Other sizes or
The shape of the model" to meet the shape and size requirements of the specific specifications specified in the specific inspection items in China's enamel field standards.
This standard has made the following editorial changes.
--- Modified the standard name;
--- Revised the note for 5.1.4 and removed several EU grade aluminum alloys as exemplified in ISO 28764.2015.
This standard is proposed and managed by the China Light Industry Association.
This standard was drafted. Donghua University, National Eyeglass Glass Enamel Product Quality Supervision and Inspection Center, Shanghai Glasses Glass Enamel Products
Quality supervision and inspection station.
1 Scope
This standard specifies the preparation method of the enamel template used for the test.
This standard applies to two different templates, including.
---Product model;
---Special model.
This standard applies to the preparation of steel plate enamel, aluminum enamel and cast iron enamel.
Note. When quantitatively determining the mass loss of enamel surface per unit area, only special samples can be used. The sample from the product will reduce the accuracy of the test method.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
ISO 2746 enamel products and enamel high voltage test (Vitreousandporcelainenamels-Highvoltagetest)
3 marked
Samples prepared in accordance with this standard shall have the following markings.
Sample. GB/T 38166- (substrate)
The steel plate substrate is labeled A, the cast iron substrate is labeled B, and the aluminum substrate is labeled C.
Example. A sample prepared from a steel substrate in accordance with this standard, marked as.
Sample. GB/T 38166-A
4 product template
4.1 Product Model Requirements
The sample should be taken from products produced according to normal parameters and cannot be taken from reworked products.
4.2 Shape and size requirements
The sample shall be round or square and shall have a diameter or side length of 105 mm +/- 5 mm.
The sample should be taken from the flat part of the enamel product (to meet the test requirements), and other test methods are specified for the sample. Other sizes can be used.
Inch or shape template. For aluminum enamel samples that are only tested for adhesion using ISO 13805, other shapes can be used.
4.3 Preparation
Before cutting the enamel product into a product sample, the front and back enamel enamel layers on the cutting line should be ground until the metal substrate is exposed. Fray off
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 2746
Cited by
- GB/T 46602-2025Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
- GB/T 9989.2-2025Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
- GB/T 9989.3-2025Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle
- GB/T 38167-2019Vitreous and porcelain enamels - Method of test of self-cleaning properties
How to Download GB/T 38166-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38166-2019
$145.00