Valid

GB/T 38112-2019Test methods of precast concrete products for tunnel (English PDF)

管廊工程用预制混凝土制品试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (34 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38112-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 18, 2019

Implementation date

September 1, 2020

Scope

GB/T 38112-2019 is the English-translated version of 管廊工程用预制混凝土制品试验方法.

GB/T 38112-2019 is the Chinese standard "Test methods of precast concrete products for tunnel". Its scope clause reads: This standard specifies the terms and definitions, test instruments and gauges, and appearance quality of test methods for precast concrete products for pipe gallery engineering.

Quantity, dimensional deviation, internal water pressure, interface corner sealing performance, external pressure load, bending resistance, pullout resistance, protective layer thickness, concrete strength, Test method for concrete impermeability, mortar compressive strength, mortar water absorption rate, exposed steel parts anti-corrosion coating, etc. Comparison method, test report.

This standard applies to single or assembled round, box-shaped and special-shaped precast concrete products for pipe gallery engineering. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 38112-2019

National Standard of the People's Republic of China

ICS
91.100.30
Classification
Q 14

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Test instruments and measuring tools
  • 5 Appearance quality
  • 6 Dimensional deviation
  • 7 internal water pressure
  • 8 interface corner sealing performance
  • 9 external pressure load
  • 10 Bending resistance
  • 11 pull resistance performance
  • 12 protective layer thickness
  • 13 Concrete strength
  • 14 Concrete impermeability
  • 15 mortar compressive strength
  • 16 mortar water absorption rate
  • 17 Exposed steel parts anti-corrosion coating
  • 18 Test data comparison and comparison method
  • 19 Test report
  • Appendix A (Normative) Main instruments and gauges for testing
  • Appendix B (informative) Internal hydraulic test device
  • Appendix C (Normative Appendix) Leak Test
  • Appendix D (Normative Appendix) External Pressure Load Test Equipment
  • Appendix E (Normative Appendix) Bending Resistance Test
  • Appendix F (Normative Appendix) Pullout Performance Test

1 Scope

This standard specifies the terms and definitions, test instruments and gauges, and appearance quality of test methods for precast concrete products for pipe gallery engineering.

Quantity, dimensional deviation, internal water pressure, interface corner sealing performance, external pressure load, bending resistance, pullout resistance, protective layer thickness, concrete strength,

Test method for concrete impermeability, mortar compressive strength, mortar water absorption rate, exposed steel parts anti-corrosion coating, etc.

Comparison method, test report.

This standard applies to single or assembled round, box-shaped and special-shaped precast concrete products for pipe gallery engineering.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 8170 Numerical Rounding Rules and Representation and Determination of Limit Values

GB/T 9286 color and varnish paint film cross-cut test

GB/T 11836 concrete and reinforced concrete drain pipe

GB/T 11837 Concrete pipe concrete compressive strength test method

GB/T 13452.2 Determination of film thickness of paints and varnishes

GB/T 15345 concrete water pipe test method

GB/T 19685 prestressed steel cylinder concrete pipe

GB/T 22082 precast concrete lining segments

GB/T 50080 Standard Test Method for Performance of Concrete Mixtures

GB/T 50081 Standard test method for mechanical properties of ordinary concrete

GB/T 50082 standard test method for long-term performance and durability of ordinary concrete

GB/T 50107 concrete strength inspection and evaluation standard

GB/T 50152 Standard Test Method for Concrete Structures

GB/T 50204-2015 Concrete structure engineering construction quality acceptance specification

JC/T 2092 steel cylinder concrete pipe for jacking construction method

JC/T 2456 precast concrete box culvert

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Pipe gallery tunnel

Structures and ancillary facilities for accommodating engineering pipelines.

3.2 Reinforced concrete round tube

A reinforced concrete product with a circular cross section of a single or assembled component.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 34 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38112-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
34 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38112-2019

$515.00