Valid

GB/T 38056-2019Determination of hydrogen sulfide and hydrogen polysulfide in liquid sulphur - Fourier transform infrared spectroscopy (English PDF)

液体硫磺中硫化氢和多硫化氢的测定 傅里叶变换红外光谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38056-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 18, 2019

Implementation date

September 1, 2020

Scope

GB/T 38056-2019 is the English-translated version of 液体硫磺中硫化氢和多硫化氢的测定 傅里叶变换红外光谱法.

GB/T 38056-2019 is the Chinese standard "Determination of hydrogen sulfide and hydrogen polysulfide in liquid sulphur - Fourier transform infrared spectroscopy".

Its scope clause reads: This standard specifies the method for the determination of hydrogen sulfide and hydrogen sulfide in liquid sulfur---Fourier transform infrared spectroscopy.

This standard applies to the quantitative determination of hydrogen sulfide and hydrogen sulfide in liquid sulfur. The total hydrogen sulfide mass fraction measured is in the range of 5 µg/g ~ 500 µg/g. Its clauses include principle; instruments.

Found what you need?

Document preview — GB/T 38056-2019

National Standard of the People's Republic of China

ICS
71.040.50
Classification
G 13

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Principle
  • 4 instruments

1 Scope

This standard specifies the method for the determination of hydrogen sulfide and hydrogen sulfide in liquid sulfur---Fourier transform infrared spectroscopy.

This standard applies to the quantitative determination of hydrogen sulfide and hydrogen sulfide in liquid sulfur. The total hydrogen sulfide mass fraction measured is in the range of

5 µg/g ~ 500 µg/g.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 21186 Fourier transform infrared spectrometer

3 Principle

Based on the principle of Michelson's interference, the interference light passes through the sample cell after the beam splitter meets, and the interference light containing the sample information after passing through the sample

Arriving at the detector, and then processing the signal by Fourier transform to obtain an infrared absorption spectrum of transmittance or absorbance with wave number or wavelength

Figure, the light intensity is proportional to the concentration of hydrogen sulfide and hydrogen sulfide, and then determined by the calibration data and map of the spectrometer

The concentration of hydrogen sulfide and hydrogen sulfide.

4 instruments

Liquid Sulfur Hydrogen Sulfide Analyzer. Intrinsic calibration procedure with hydrogen sulfide and hydrogen sulfide concentration, liquid sulfur sample cell and heater Fourier

Transform the infrared spectrometer. The technical parameters of each software and hardware should meet the following requirements.

a) Intrinsic calibration procedure for hydrogen sulfide and hydrogen polysulfide concentrations. total hydrogen sulfide concentration ranges from 5 µg/g to 500 µg/g.

b) Sample cell. portable analysis room, made of corrosion-resistant and easy-to-clean metal material, equipped with KCl detection lens, heated plate

Heat and maintain 135 ° C ~ 145 ° C to ensure that the sulfur sample tested is liquid.

c) Sample cell electric preheater. tray heater, can control temperature 135 ° C ~ 150 ° C, temperature control accuracy ± 1 ° C.

d) Fourier transform infrared spectrometer. mainly composed of light source chamber, interferometer, sample cell, detector, interface and data processing system, instrument

The resolution and stability of the device are in accordance with GB/T 21186. The structure of the instrument is shown in Figure 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38056-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38056-2019

$85.00