Valid

GB/T 38052.7-2023Interoperability of smart household appliances system—Part 7: Specification for conformance test (English PDF)

智能家用电器系统互操作第7部分：一致性测试规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (56 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38052.7-2023 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 7, 2023

Implementation date

April 1, 2024

Scope

GB/T 38052.7-2023 is the English-translated version of 智能家用电器系统互操作第7部分：一致性测试规范.

GB/T 38052.7-2023 is Part 7 of GB/T 38052 and describes the tests that show whether the parts of a smart home appliance system interoperate as they should.

It covers four kinds of item under test - smart home appliances, manufacturer service platforms, public control terminals and the public management units of smart home appliances - and for each one gives the test environment, the network connection and the test methods, taken pair by pair with the industry service platform, the public management unit and the managed appliance.

The test environment is an industry service platform with its supporting equipment plus the item under test. The conformance test is a minimum set of tests inside basic function testing, and only the master user is in scope. It was issued on 7 September 2023 and has applied since 1 April 2024.

Found what you need?

Document preview — GB/T 38052.7-2023

National Standard of the People's Republic of China

ICS: 97.030
Classification: Y 60

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
Introduction
1 Scope
2 Normative reference documents
3 Terms and Definitions
4 Test instructions
4.1 Overview
4.2 Test environment
4.3 Test instructions
5 Interoperability consistency test of smart home appliances
5.1 Interoperability consistency test between smart home appliances and industry service platforms
5.2 Interoperability conformance testing between managed appliances and public management units
6 Interoperability consistency testing of vendor service platforms
6.1 Test environment
6.2 Test network connection Figure
6.3 Test method
7 Interoperability conformance testing of public control terminals
7.1 Interoperability consistency test between public control terminals and industry service platforms
7.2 Interoperability consistency test between public control terminal and public management unit
8 Interoperability conformance testing of common management units
8.1 Interoperability consistency test between public management units and industry service platforms
8.2 Interoperability conformance testing between common management units and managed appliances
8.3 Interoperability consistency test between public management units and public control terminals

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

This document is Part 7 of GB/T 38052 "Smart Home Appliance System Interoperability". GB/T 38052 has released the following part.

---Part 1: Terminology;

---Part 2: General requirements;

---Part 3: Interface specifications between service platforms;

---Part 4: Public control terminal interface specifications;

---Part 5: Smart home appliance interface specifications;

---Part 6: Interface specifications for public management units of smart home appliances;

---Part 7: Conformance test specifications.

Introduction

The smart home appliance system is a complex system including smart home appliances, public control terminals, public management units, and various service platforms.

Devices and platforms from different manufacturers interoperate in smart home appliance systems. This document aims to standardize smart home appliance interoperability, factory Test methods for interoperability of business service platforms, interoperability of public control terminals, and interoperability consistency of public management units of smart home appliances.

Interoperability of household electrical appliance systems provides a basis for testing.

GB/T 38052 "Smart Home Appliance System Interoperability" is planned to consist of seven parts.

---Part 1: Terminology. The purpose is to define terms and definitions for the interoperability of smart home appliance systems.

---Part 2: General requirements. The purpose is to specify parameters for interoperability between components of smart home appliance systems. Examine models, general requirements, basic processes and interfaces.

---Part 3: Interface specifications between service platforms. The purpose is to create a service platform for the smart home appliance industry and a service platform for manufacturers Interoperability between them stipulates basic processes and interfaces.

---Part 4: Public control terminal interface specification. The purpose is to integrate the control terminal with other parts of the smart home appliance system Basic processes and interfaces are specified for interoperability between different components.

---Part 5: Smart home appliance interface specifications. The purpose is to enable interoperability between smart home appliances and industry service platforms And stipulate the basic processes and interfaces.

---Part 6: Interface specifications for public management units of smart home appliances. The purpose is to integrate the public management unit of smart home appliances with the smart home It stipulates basic processes and interfaces for interoperability between electricity, industry service platforms and public control terminals.

---Part 7: Conformance test specifications. The purpose is to establish test methods for smart home appliance system interoperability.

1 Scope

This document describes the test methods for interoperability consistency of smart home appliances (hereinafter referred to as "smart home appliances") and interoperability of manufacturer service platforms.

Test methods for consistency of operation, test methods for interoperability consistency of public control terminals, smart home appliance public management units (hereinafter referred to as "public Management unit") interoperability consistency testing method.

This document is applicable to the interoperability compliance testing of various parts of the smart home appliance system.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.

GB/T 36426 General requirements for smart home appliance service platforms

GB/T 38052.1 Smart home appliance system interoperability Part 1: Terminology

GB/T 38052.2 Smart home appliance system interoperability Part 2: General requirements

GB/T 38052.3 Smart home appliance system interoperability Part 3: Interface specifications between service platforms

GB/T 38052.4 Smart home appliance system interoperability Part 4: Control terminal interface specifications

GB/T 38052.5 Smart home appliance system interoperability Part 5: Smart home appliance interface specification

GB/T 38052.6 Smart home appliance system interoperability Part 6: Smart home appliance public management unit interface specification

3 Terms and definitions

The terms and definitions defined in GB/T 36426, GB/T 38052.1, and GB/T 38052.6 apply to this document.

4 Test instructions

4.1 Overview

The interoperability conformance test of smart home appliance systems covers various interoperability models specified in GB/T 38052.2, verifying smart home appliances The system follows the standards of GB/T 38052.3, GB/T 38052.4, GB/T 38052.5, and GB/T 38052.6 for different types and manufacturers. Testing for interoperability between appliances or platforms.

Conformance testing is only a minimal set of tests for interoperability within basic functional testing.

The user in this document is the master user, and the related operations of the slave user are not within the testing scope of this document.

4.2 Test environment

The test environment consists of the test system and the appliance or platform under test. The test system includes industry service platforms and related supporting system equipment.

The home appliances or platforms under test include: smart home appliances connected to industry service platforms, manufacturer service platforms connected to industry service platforms.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 56 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB/T 24986.7-2026|GB/T 45354.2-2026|GB/T 47775-2026|GB/T 47776-2026|GB/T 47778-2026|GB/T 21551.8-2025

How to Download GB/T 38052.7-2023

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.