GB/T 38023-2019Finishing requirements for parts and assemblies of the mechanical watch movements (English PDF)
机械手表机心零部件的精饰要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38023-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 38023-2019 is the English-translated version of 机械手表机心零部件的精饰要求.
GB/T 38023-2019 is the Chinese standard "Finishing requirements for parts and assemblies of the mechanical watch movements". Its scope clause reads: This Standard specifies the requirements and inspection methods for parts and assemblies of the mechanical watch movements.
This Standard applies to parts and assemblies of the mechanical watch movements that have undergone finishing processing (hereinafter referred to as "parts and assemblies").
Its clauses include requirements; inspection method. It was issued by the State Administration for Market Regulation on AUGUST 30, 2019 and took effect on MARCH 01, 2020.
Found what you need?
Document preview — GB/T 38023-2019
National Standard of the People's Republic of China
- ICS
- 39.040.10
- Classification
- Y 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative references4
- 3 Requirements4
- 4 Inspection method6
1 Scope
This Standard specifies the requirements and inspection methods for parts and assemblies of the mechanical watch movements.
This Standard applies to parts and assemblies of the mechanical watch movements that have undergone finishing processing (hereinafter referred to as "parts and assemblies").
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 10610, Geometrical product specifications (GPS) - Surface texture:
Profile method - Rules and procedures for the assessment of surface texture
3 Requirements
3.1 Surface quality requirements of metal parts and assemblies
Metal parts and assemblies shall not have surface defects, such as indentation, pits, scratches, burn marks, local highlights after polishing, and spots and blisters after electroplating. The surface color of all parts and assemblies shall be uniform and coordinated.
3.2 Finishing requirements for metal parts and assemblies
3.2.5.3 The gem hole of the splint shall be chamfered and polished.
3.2.1 General
Mirror polishing for finishing of metal parts and assemblies means that the surface roughness Ra value shall not be greater than 0.05 µm; polishing means that the surface roughness Ra value shall not be greater than 0.2 µm.
As long as the finishing process meets the surface roughness requirements, there is no limit for the processing method.
3.2.2 Gear train parts
3.2.6 Automatic parts
3.2.6.1 The gear train and splint parts in the automatic train shall meet the requirements in 3.2.2 and 3.2.5 respectively.
3.2.6.2 The surface of the automatic hammer shall be flat; the upper and lower planes shall be eliminated from irregular processing patterns; the outer circle of the hammer edge shall be chamfered and polished; the upper plane and chamfers can be processed by ray grinding or sandblasting.
3.2.6.3 The exposed upper surface of the bearing of the automatic hammer shall be polished.
3.2.7 Screw
3.2.7.1 The upper plane of the screw cap shall be mirror polished; the outer circle of the screw cap shall be chamfered and polished.
3.2.7.2 The end face of the screw thread shall be flat.
3.2.8 Printing plate
3.2.8.1 The printing on the printing plate (such as calendar ring, weekly calendar plate, moon phase plate) shall be clear, full and fast. There shall be no broken lines, uneven thickness, and obvious shortage of fonts and numbers.
There shall be no defects such as brushed fonts, deformation, and white spots.
3.2.8.2 The spray paint color of the dial shall be uniform; the paint surface shall be smooth and even. There shall be no discoloration, yellowing, peeling, fingerprints, sticky silk, paint residue or other debris.
3.2.9 Additional mechanism parts
3.2.9.1 The gear train and splint parts in the additional mechanism shall meet the requirements in 3.2.2 and 3.2.5 respectively.
3.2.9.2 The upper surface of rod-type parts shall be polished; the surface shall be smooth and the contour lines shall be smooth.
4 Inspection method
4.1 Inspection conditions
Except for special requirements, the ambient temperature for inspection is 18 °C ~ 25 °C; during the entire inspection process, the temperature fluctuation is not more than 2 °C; the relative humidity is not more than 70%. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 38023-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10610-1989 — Rules and procedures for the measurement of surface roughness using stylus instrument
GB/T 10610-1998 — Geometrical Product Specifications (GPS)-Surface texture: Profile method--Rules and procedures for the assessment of surface texture
GB/T 10610-2009 — Geometrical product specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture
GB/T 38023-2019
$85.00