GB/T 38006-2019Textiles—Method for determination of dimensional changes of fabrics by steam ironing (English PDF)
纺织品 织物经蒸汽熨烫后尺寸变化试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38006-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 38006-2019 is the English-translated version of 纺织品 织物经蒸汽熨烫后尺寸变化试验方法.
GB/T 38006-2019 is the Chinese standard "Textiles—Method for determination of dimensional changes of fabrics by steam ironing". Its scope clause reads: This standard specifies the test method for determining the dimensional change of fabric after steam ironing.
This standard applies to all kinds of fabrics. Its clauses include general; principle; instruments and tools.
Found what you need?
Document preview — GB/T 38006-2019
National Standard of the People's Republic of China
- ICS
- 59.080.30
- Classification
- W 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 General
- 4 Principle
- 5 instruments and tools
1 Scope
This standard specifies the test method for determining the dimensional change of fabric after steam ironing.
This standard applies to all kinds of fabrics.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6529 Standard atmosphere for textile conditioning and testing
3 General
The test method for dimensional change of fabric after steam ironing mainly includes the use of flat steam press ironing test method and industrial steaming
Steam iron ironing test method.
The test method using the flat steam press machine is described in Chapter 4 ~ Chapter 9;
Appendix A.
4 Principle
Steam ironing of the fabric on a flat steam press under specified pressure, temperature and time conditions, determining the fabric before and after ironing
The rate of change in size.
5 instruments and tools
5.1
Flat steam presses shall meet the following requirements.
--- It can provide steam and hot plate heating method, and the working area of upper and lower ironing plates meets the test requirements;
---Vapor pressure can be adjusted within the range of 0MPa~1MPa, the accuracy is ±0.05MPa;
---The pressure of the ironing plate can be adjusted within the range of 0kPa~60kPa, and the accuracy is ±2.5kPa;
---The temperature can be adjusted from room temperature to.200 °C with an accuracy of ±1 °C;
---The timer can be adjusted within the range of 0s~30s;
--- Steam injection method. It adopts the upper hot plate spray type, the steam injection hole has a hole diameter of 3mm and the hole spacing is 2cm.
The schematic diagram of the structure of the flat steam press is shown in Figure 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38006-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38006-2019
$145.00