GB/T 37991-2019Measuring method for ultra-thin glass reheating line shrinkage - Dilatometer method (English PDF)
超薄玻璃再热线收缩率测试方法 膨胀仪法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37991-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
July 1, 2020
Scope
GB/T 37991-2019 is the English-translated version of 超薄玻璃再热线收缩率测试方法 膨胀仪法.
GB/T 37991-2019 is the Chinese standard "Measuring method for ultra-thin glass reheating line shrinkage - Dilatometer method". Its scope clause reads: This standard specifies the terms and definitions, test principles, test devices and conditions for testing the shrinkage rate of ultra-thin glass reheating line by the dilatometer method.
Samples, test procedures, results calculations, test reports, etc. This standard is applicable to the test of the shrinkage rate of ultra-thin glass reheating line with thickness of 0.4mm~1.1mm, and the reheating line of other thickness flat glass The test for shrinkage can be referred to this standard. Its clauses include terms and definitions; test principle.
Found what you need?
Document preview — GB/T 37991-2019
National Standard of the People's Republic of China
- ICS
- 81.040.30
- Classification
- Q 34
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Test principle
1 Scope
This standard specifies the terms and definitions, test principles, test devices and conditions for testing the shrinkage rate of ultra-thin glass reheating line by the dilatometer method.
Samples, test procedures, results calculations, test reports, etc.
This standard is applicable to the test of the shrinkage rate of ultra-thin glass reheating line with thickness of 0.4mm~1.1mm, and the reheating line of other thickness flat glass
The test for shrinkage can be referred to this standard.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 15764 flat glass terminology
3 Terms and definitions
The following terms and definitions as defined in GB/T 15764 apply to this document.
3.1 Reheat line shrinkage rate
The ultra-thin glass product is heated again to a specific temperature for a certain period of time, and after cooling to room temperature for a certain period of time, the amount of shrinkage in the length direction is the same as the original length.
The ratio of degrees.
4 Test principle
The glass sample is cooled by reheating, that is, it is heated to a specific temperature at a set heating rate from room temperature, and then kept for a while, and then kept for a while.
When the set cooling rate is lowered to room temperature, the original length Li shrinks relative to before heating. Measuring the length of the glass with a thermal dilatometer
The amount of shrinkage deltaLi, the ratio of the amount of shrinkage to the original length, is the reheat line shrinkage of the glass sample, as shown in FIG.
Description.
Li --- original length of the sample;
deltaLi - the amount of shrinkage after reheating of the sample.
Fig.1 Schematic diagram of length change after reheating of glass sample […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37991-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37991-2019
$85.00