Valid

GB/T 37984-2019Nanotechnologies—Raman shift correction value for spectrometer calibration (English PDF)

纳米技术 用于拉曼光谱校准的频移校正值

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37984-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 30, 2019

Implementation date

March 1, 2020

Scope

GB/T 37984-2019 is the English-translated version of 纳米技术 用于拉曼光谱校准的频移校正值.

GB/T 37984-2019 is the Chinese standard "Nanotechnologies—Raman shift correction value for spectrometer calibration". Its scope clause reads: This standard specifies calibration conditions and calibration methods for frequency shift correction values for Raman spectral calibration.

This standard applies to the daily use of a dispersion-type Raman spectrometer with a single-stage, two-stage or three-level grating with a continuous laser as the excitation source. calibration.

This standard does not apply to non-dispersive Raman spectrometers such as Fourier transform Raman spectroscopy. Its clauses include terms and definitions; overview.

Found what you need?

Document preview — GB/T 37984-2019

National Standard of the People's Republic of China

ICS
17.180.30
Classification
N 35

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Overview

1 Scope

This standard specifies calibration conditions and calibration methods for frequency shift correction values for Raman spectral calibration.

This standard applies to the daily use of a dispersion-type Raman spectrometer with a single-stage, two-stage or three-level grating with a continuous laser as the excitation source.

calibration.

This standard does not apply to non-dispersive Raman spectrometers such as Fourier transform Raman spectroscopy.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 13966 Analytical Instrument Terminology

JJF1544 Raman Spectrometer Calibration Specification

3 Terms and definitions

The following terms and definitions defined in GB/T 13966 and JJF 1544 apply to this document.

3.1 Low-voltage atomic line lamp low-pressureatomemissionlamp

Low-pressure gas discharge source.

Example. xenon lamp, argon lamp or mercury lamp.

3.2 Static spectral window

The spectral range obtained by the spectrometer when the grating of the spectrometer is in static mode, ie when the grating is stationary at a specified angle.

Note. The static spectral window is usually obtained by specifying the center wave number in the case of charge coupled device (CCD) detection. The starting wave number and the cutoff wave number range are determined by

The physical structure of the spectrometer itself is defined.

3.3 Rayleigh Line

The same frequency as the incident laser.

Note. The composition includes all photons whose energy does not change, such as Rayleigh scattering, diffuse scattering, and surface reflection generated by laser irradiation.

4 Overview

The Raman spectrum is a spectrum obtained by changing the frequency of monochromatic light by inelastic scattering of atoms in a molecule or a lattice. Raman spectrum package

Information containing molecular or lattice vibrations has a wide range of applications in the fields of material identification, crystal structure analysis, and stress analysis. Dispersive Raman Light

The spectrometer usually uses a laser as a light source and can be equipped with one or more wavelengths of lasers; the grating is the main dispersion component, which can have a single stage, two

Grade or tertiary grating. The accuracy of the physical structure of the spectrometer and the mechanical repeatability of the control motor can measure the accuracy of the Raman shift.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37984-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37984-2019

$205.00