GB/T 37905-2019Reclaimed water quality - Determination of chromium - Voltammetry and polarography (English PDF)
再生水水质 铬的测定 伏安极谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37905-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
July 1, 2020
Scope
GB/T 37905-2019 is the English-translated version of 再生水水质 铬的测定 伏安极谱法.
GB/T 37905-2019 is the Chinese standard "Reclaimed water quality - Determination of chromium - Voltammetry and polarography". Its scope clause reads: This standard specifies the test method for total chromium, hexavalent chromium and trivalent chromium in reclaimed water--voltammetric polarography.
This standard applies to the determination of the mass concentration of chromium in reclaimed water, the measurement range is 1.0µg/L ~ 100µg/L. This standard also applies to Determination of total chromium, hexavalent chromium and trivalent chromium in drinking water, surface water, sewage. Its clauses include terms and definitions; method summary.
Found what you need?
Document preview — GB/T 37905-2019
National Standard of the People's Republic of China
- ICS
- 13.060.50
- Classification
- G 76
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Method summary
1 Scope
This standard specifies the test method for total chromium, hexavalent chromium and trivalent chromium in reclaimed water--voltammetric polarography.
This standard applies to the determination of the mass concentration of chromium in reclaimed water, the measurement range is 1.0µg/L ~ 100µg/L. This standard also applies to
Determination of total chromium, hexavalent chromium and trivalent chromium in drinking water, surface water, sewage.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Preparation of standard solution for GB/T 602 chemical reagent impurity determination
GB/T 6682 Analytical laboratory water specifications and test methods
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Pre-electrolysis
Under certain potential and agitation conditions, a certain period of time is prescribed to electrolyze and concentrate part of the analyte onto the working electrode.
3.2 Electrolyte
A solution used to dissolve a sample for voltammetric polarography.
3.3 Dissolution scan determination
After enrichment, the potential is changed from positive to negative, and the potential is changed linearly at a certain scanning rate. This process will be enriched to work electricity
The analyte on the electrode was dissolved and the stripping voltammetry curve was recorded.
3.4 Non-stoichiometric methodmethodnon-chemical
Under certain conditions, the analyte is partially electrolyzed and dissolved by a quantitative electrochemical reaction, and passed through the standard of electrolysis and dissolution under the same conditions.
The method of comparing the quasi-objects to calculate the content of the analyte.
4 Method summary
Using the principle of non-stoichiometry, the hexavalent chromium in the water sample reacts with diethylenetriaminepentaacetic acid (DTPA) to produce a certain product.
Within the current and voltage range, it is adsorbed and enriched on the suspended mercury electrode. When the electrode potential is uniformly scanned from the positive negative direction, the potential can be enriched
When the complex reacts, the metal complex enriched on the electrode forms ions into the solution, and the half-wave is utilized according to the obtained voltammetry curve.
The position was qualitatively analyzed, quantitative analysis was performed based on the peak height, and the content of the hexavalent chromium ion to be tested was calculated by the standard addition method. When measuring total chromium,
All chromium is first oxidized to hexavalent chromium in the presence of a strong oxidant and then measured. Trivalent chromium content from total chromium and hexavalent chromium […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37905-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37905-2019
$145.00