Valid

GB/T 37896-2019Lightweight crystalline silicon photovoltaic (PV) laminated glass (English PDF)

轻质晶体硅光伏夹层玻璃

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37896-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 30, 2019

Implementation date

July 1, 2020

Scope

GB/T 37896-2019 is the English-translated version of 轻质晶体硅光伏夹层玻璃.

GB/T 37896-2019 is the Chinese standard "Lightweight crystalline silicon photovoltaic (PV) laminated glass". Its scope clause reads: This standard specifies the terms and definitions, classification, materials, requirements, test methods, inspection rules, and packages for lightweight crystalline silicon photovoltaic laminated glass.

Loading, marking, transportation and storage. This standard applies to lightweight crystalline silicon photovoltaic laminated glass attached to buildings or used in awnings, carports, sunrooms, and roofing parts.

It is also suitable for lightweight crystalline silicon photovoltaic laminated glass for ground and surface power stations.

Found what you need?

Document preview — GB/T 37896-2019

National Standard of the People's Republic of China

ICS
81.040.30
Classification
Q 34

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Category
  • 5 Material
  • 5.1 Glass
  • 5.2 Battery
  • 5.3 Intermediate Layer
  • 5.4 Soldering strip
  • 5.5 Terminal
  • 5.6 Border
  • 6 Requirements
  • 6.1 Dimensional deviation
  • 6.2 Bending
  • 6.3 Fire test
  • 6.4 Other requirements
  • 7 Test method
  • 7.1 General
  • 7.2 Dimensional deviation
  • 7.3 Bending
  • 7.4 Performance under standard test conditions (STC)
  • 7.5 Maximum power determination
  • 7.6 Temperature test
  • 7.7 Hot spot endurance test
  • 7.8 Fire test
  • 7.9 Bypass Diode Thermal Performance Test
  • 7.10 Reverse Current Overload Test
  • 7.11 Dynamic Mechanical Load Test
  • 7.12 Outdoor exposure test
  • 7.13 Thermal cycle test
  • 7.14 Wet Free Test
  • 7.15 Initial stability test
  • 7.16 Other test methods
  • 8 Inspection rules
  • 8.1 Inspection classification
  • 8.2 Sampling method
  • 8.3 Decision Rule
  • 9 Packaging, labeling, transportation and storage
  • 9.1 Packing
  • 9.2 Mark
  • 9.3 Transportation
  • 9.4 Storage
  • 10 Test report
  • Appendix A (informative) Component Level
  • Appendix B (informative) Material Group
  • Appendix C (informative) Pollution degree
  • Appendix D (Normative) Measurement of current-voltage characteristics of double-sided photovoltaic devices

1 Scope

This standard specifies the terms and definitions, classification, materials, requirements, test methods, inspection rules, and packages for lightweight crystalline silicon photovoltaic laminated glass.

Loading, marking, transportation and storage.

This standard applies to lightweight crystalline silicon photovoltaic laminated glass attached to buildings or used in awnings, carports, sunrooms, and roofing parts.

It is also suitable for lightweight crystalline silicon photovoltaic laminated glass for ground and surface power stations.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 2423.37-2006 Environmental testing for electric and electronic products - Part 2. Test methods Test L. Dust test

GB/T 29551-2013 Solar photovoltaic laminated glass for construction

GB/T 29848 ethylene-vinyl acetate copolymer (EVA) film for PV module packaging

GB/T 31985 Photovoltaic tinned solder ribbon

GB/T 34328 lightweight physical tempered glass

JG/T 449 polyvinyl butyral (PVB) film for photovoltaic modules

JG/T 482-2015 General technical requirements for photovoltaic shading components for building

ISO 8124-1.2014 Toy Safety Part 1. Safety aspects related to mechanical and physical properties (Safetyoftoys-

Part 1. Safetyaspectsrelatedtomechanicalandphysicalproperties)

IEC 61215-1.2016 Design and identification of surface photovoltaic modules - Part 1 . Test requirements [Terrestrialphoto-

Voltaic(PV)modules-Designqualificationandtypeapproval-Part 1.Testrequirements]

IEC 61215-1-1.2016 Designing and Qualification of Photovoltaic Modules for Use in Flooring Part 1-1. Special Tests for Crystalline Silicon Photovoltaic Modules

Inspection requirements [Terrestrialphotovoltaic(PV)modules-Designqualificationandtypeapproval-Part 1-1.

Specialrequirementsfortestingofcrystalinesiliconphotovoltaic(PV)modules]

IEC 61215-2.2016 Design and identification of surface photovoltaic modules - Part 2. Test procedures [Terrestrialphoto-

Voltaic(PV)modules-Designqualificationandtypeapproval-Part 2.Testprocedures]

IEC 61701.2011 Salt spray corrosion test for photovoltaic modules [Saltmistcorrosiontestingofphotovoltaic(PV)mod-

Ules]

IEC 61730-1.2016 Safety assessment of photovoltaic (PV) components - Part 1. Structure requirements [Photovoltaic(PV)module safetyqualification-Part 1. Requirementsforconstruction]

IEC 61730-2.2016 Safety assessment of photovoltaic (PV) components - Part 2. Test requirements [Photovoltaic(PV)module safetyqualification-Part 2. Requirementsfortesting]

IEC 62716.2013 Photovoltaic module ammonia corrosion test [Photovoltaic(PV)modules-Ammoniacorrosiontes-

Ting]

IEC TS62782.2016 Dynamic mechanical load test of photovoltaic (PV) components [Photovoltaic(PV)modules-Cyclic (dynamic)mechanicalloadtesting] […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37896-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37896-2019

$355.00