Valid

GB/T 37889-2019Rubber-or plastics-coated fabrics—Test method for liquid contamination (English PDF)

橡胶或塑料涂覆织物 致液体污染性测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37889-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 30, 2019

Implementation date

July 1, 2020

Scope

GB/T 37889-2019 is the English-translated version of 橡胶或塑料涂覆织物 致液体污染性测试方法.

GB/T 37889-2019 specifies a test method for the liquid contamination caused by rubber or plastic coated fabrics. Clause 1 states that the standard applies to coated fabrics used to package, store or transport liquid cargo.

Clause 3 sets out two definitions: liquid contamination, described as the change in the performance indicators of the liquid under test when some components of the coated fabric migrate or dissolve into it on contact, and a second term for the degree of that contamination, measured as the extent of change in the relevant performance index of a given volume of test liquid kept in contact with a unit area of coated fabric at a set temperature for a set time.

Clause 4, Principle, restates the measurement idea: a coated fabric surface of a certain area is held in contact with the test liquid for a certain time, and the contamination is judged by detecting the changes in the performance index of that liquid.

Clause 5 covers equipment and opens with 5.1, the liquid holding cup, whose structure is shown in Figure 1 and which is to be made of stainless steel, aluminium alloy or another material that does not react with the liquid under test, and machined with a seal line.

Clause 2 cites GB/T 24133-2009 and GB/T 24136. The standard was proposed by the China Petroleum and Chemical Industry Federation and is under the jurisdiction of the National Rubber and Rubber Products Standardization Technical Committee (SAC/TC35).

The draft on the source page is cut off in the middle of 5.1, so no further clause is shown and the page prints no contents list. It was issued on 2019-08-30 and has applied since 2020-07-01.

Found what you need?

Document preview — GB/T 37889-2019

National Standard of the People's Republic of China

ICS
59.080.40
Classification
G 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Principle
  • 5 Equipment

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the test method for liquid contamination caused by rubber or plastic coated fabrics.

This standard applies to coated fabrics used to package, store or transport liquid cargo.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 24133-2009 Standard environment for adjustment and testing of rubber or plastic coated fabrics

GB/T 24136 Determination of liquid resistance of rubber or plastic coated fabrics

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Liquid contamination

When in contact with the liquid to be tested, some of the components in the coated fabric are caused to migrate or are dissolved into the liquid to be tested, causing the properties of the liquid to be tested. The characteristics of the indicator changes.

3.2 Coating fabric causing liquid contamination

The coated fabric per unit area is contacted with a certain volume of the tested liquid at a certain temperature for a certain period of time, resulting in the liquid-related performance index of the measured liquid. The extent of the change.

4 Principle

The surface of the coated fabric of a certain area is contacted with the liquid to be tested for a certain period of time, and part of the components in the surface layer of the coated fabric are migrated or Dissolved into the liquid to be tested, resulting in changes in the performance index of the measured liquid. Judging coating woven by detecting changes in the performance index of the liquid to be tested The contamination of the object with the liquid being tested.

5 Equipment

5.1 Liquid holding cup

The structure of the liquid holding cup is shown in Figure 1. The liquid holding cup should be made of stainless steel, aluminum alloy, etc., which does not react with the liquid to be tested.

Quality production. The test cup should be machined with a seal line.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 37889-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37889-2019

$90.00