GB/T 37858-2019Pulp—Determination of the weight of wet fiber (English PDF)
纸浆 纤维湿重的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37858-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37858-2019 is the English-translated version of 纸浆 纤维湿重的测定.
GB/T 37858-2019 is the Chinese standard "Pulp—Determination of the weight of wet fiber". Its scope clause reads: This standard specifies the method for determining the wet weight of pulp fibers.
This standard applies to all kinds of pulp. Its clauses include terms and definitions; principle; instruments and reagents.
Found what you need?
Document preview — GB/T 37858-2019
National Standard of the People's Republic of China
- ICS
- 85.010
- Classification
- Y 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
- 5 instruments and reagents
1 Scope
This standard specifies the method for determining the wet weight of pulp fibers.
This standard applies to all kinds of pulp.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 740 pulp sample taken
GB/T 5399 Determination of pulp slurry concentration
GB/T 22903 Standard water for pulp physics test
GB/T 24327-2009 pulp laboratory wet dissociation chemical pulp dissociation
GB/T 29285-2012 pulp laboratory wet dissociation mechanical pulp dissociation
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Fiber wet weight
Under the specified conditions, the frame rises from the bottom of the Shawble-Rigler-type water purifier with a pulp suspension to the top
After that, the quality of the wet fiber left on the frame.
4 Principle
Place the selected frame on the sealed cone at the bottom of the Shawble-Rigler-type water purifier, then add a volume and a thick
Pour the pulp suspension into the water filter of the Shawble-Rigler-type beating meter, lift the sealing cone and weigh the wet fiber hanging on the frame.
The quality of the dimension is the wet weight of the fiber.
5 instruments and reagents
5.1
Xiao Boer-Rigler type beating meter.
5.2 Electronic balance
The sensitivity is 0.01g.
5.3 Measuring cylinder
1000mL.
5.4 Stopwatch or electronic timer
resolution is 0.1s.
5.5 Fiber wet weight frame
divided into 16 and 25 gears, the structure and dimensions are shown in Appendix A.
5.6 Standard dissociator
It should meet the requirements of Appendix B of GB/T 24327-2009 or Appendix B of GB/T 29285-2012.
5.7 Standard water
It should meet the requirements of GB/T 22903. If other water is used, it should be noted in the report.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37858-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37858-2019
$145.00