GB/T 37838-2019Pulp - Determination of dynamic viscosity number in cupri-ethylenediamine(CED) solution (English PDF)
纸浆 铜乙二胺(CED)溶液动力粘度的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37838-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37838-2019 is the English-translated version of 纸浆 铜乙二胺(CED)溶液动力粘度的测定.
GB/T 37838-2019 is the Chinese standard "Pulp - Determination of dynamic viscosity number in cupri-ethylenediamine(CED) solution". Its scope clause reads: This standard specifies the principle of determination of the dynamic viscosity of pulp in copper ethylene diamine (CED) solution, calibration of reagents, instruments, viscometers, and tests.
Sample preparation, test procedures, calculations, test reports. This standard applies to a variety of pulp that can be completely dissolved in copper ethylene diamine solution. Its clauses include terms and definitions; principle; reagent.
Found what you need?
Document preview — GB/T 37838-2019
National Standard of the People's Republic of China
- ICS
- 85.010
- Classification
- Y 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
- 5 reagent
1 Scope
This standard specifies the principle of determination of the dynamic viscosity of pulp in copper ethylene diamine (CED) solution, calibration of reagents, instruments, viscometers, and tests.
Sample preparation, test procedures, calculations, test reports.
This standard applies to a variety of pulp that can be completely dissolved in copper ethylene diamine solution.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 462 Determination of moisture in paper, paperboard and pulp analysis samples
Determination of intrinsic viscosity value of GB/T 1548 pulp copper ethylene diamine (CED) solution
GB/T 6682 Analytical laboratory water specifications and test methods
3 Terms and definitions
The following terms and definitions as defined in GB/T 1548 apply to this document.
3.1 Dynamic viscosity
The proportionality between the friction between the two layers of liquid and the velocity gradient as the fluid flows.
Note. expressed by the symbol eta, the unit is millipascal seconds (mPa·s).
4 Principle
A certain amount of pulp dry sample is dissolved in copper ethylene diamine solution, the density of the solution is measured at 20 ° C and passed through the capillary
The flow time of the viscometer is calculated from these measured values, and is expressed in mPa·s.
5 reagent
Unless otherwise stated, reagents identified as analytically pure should be used in the analysis.
5.1
Water, GB/T 6682, Level 3.
5.2
Copper ethylenediamine solution, concentration c (CED) = (1.00 ± 0.02) mol/L, containing 1.0 mol of copper and 2.0 mol of ethylene per liter of solution amine. The solution should be prepared and calibrated in accordance with the provisions of GB/T 1548.
5.3 A certified standard viscosity solution or a solution of known kinematic viscosity with an accurate kinematic viscosity at 20 °C.
5.4
Nitric acid solution, phi (HNO3) = 5% (volume fraction).
5.5
Acetone, CH3COCH3.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37838-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37838-2019
$85.00