GB/T 37810-2019General matching specification for large cutting height mining face (English PDF)
大采高综采工作面总体配套技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37810-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37810-2019 is the English-translated version of 大采高综采工作面总体配套技术条件.
GB/T 37810-2019 is the Chinese standard "General matching specification for large cutting height mining face".
Its scope clause reads: This standard stipulates the technical requirements for the overall matching of fully mechanized mining face with large mining height (including extra high mining height) and the overall equipment of large mining height fully mechanized mining face.
Supporting verification. This standard is applicable to the overall supporting of large mining height fully mechanized mining face with coal seam thickness greater than 3.5m in underground coal mining (hereinafter referred to as large mining height). Matching).
Found what you need?
Document preview — GB/T 37810-2019
National Standard of the People's Republic of China
- ICS
- 73.100.01
- Classification
- D 90
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
1 Scope
This standard stipulates the technical requirements for the overall matching of fully mechanized mining face with large mining height (including extra high mining height) and the overall equipment of large mining height fully mechanized mining face.
Supporting verification.
This standard is applicable to the overall supporting of large mining height fully mechanized mining face with coal seam thickness greater than 3.5m in underground coal mining (hereinafter referred to as large mining height).
Matching).
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB 18452 Breaking equipment safety requirements
GB/T 24506 hydraulic bracket type, parameters and model preparation
GB 25974.1 Hydraulic support for coal mines - Part 1. General technical conditions
GB/T 37771-2019 coal mine fully mechanized mining face overall supporting guidelines
GB 50581 Coal Industry Mine Monitoring and Monitoring System Equipment Configuration Standard
AQ1021 High-pressure spray dust reduction technical specification for coal mining face
MT/T 81 drum shearer type inspection specification
MT/T 82 drum shearer factory inspection specification
MT/T 84 drum shearer type and basic parameters
MT/T 103 mining scraper conveyor factory inspection specification
General technical requirements for MT/T 105 scraper conveyor
MT/T 106 Slotted scraper transferer general technical conditions
MT/T 154.4 Coal Mine Belt Conveyor Model Preparation Method
MT/T 188.1 Emulsion pumping station for coal mines - Part 1. Pumping station
MT/T 188.2 Emulsion pump station for coal mine emulsion pump
MT/T 493 Chute crusher
MT/T 529 Coal Mine Telescopic Belt Conveyor Parameters
MT550 large mining height hydraulic support technical conditions
MT/T 556 Hydraulic Support Design Specification
MT820 Technical requirements for belt conveyors for coal mines
MT/T 901 coal mine underground telescopic belt conveyor
MT/T 1136-2011 Mine cooling technical specification […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 37810-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 37810-2019
$145.00