GB/T 37799-2019Shaped reinforced concrete pipes (English PDF)
钢筋混凝土异形管
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37799-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
July 1, 2020
Scope
GB/T 37799-2019 is the English-translated version of 钢筋混凝土异形管.
GB/T 37799-2019 is the Chinese standard "Shaped reinforced concrete pipes".
Its scope clause reads: This standard specifies the classification, raw and auxiliary materials, technical requirements for pipe making, test methods, inspection rules, signs, and transportation of reinforced concrete shaped pipes, and storage, factory certificate and other content.
This standard applies to the production and manufacture of special-shaped pipe products using slotted construction. Production of reinforced concrete shaped pipes for other purposes The negotiation between the supplier and the buyer may also be carried out with reference to this standard. Its clauses include terms, definitions and symbols.
Found what you need?
Document preview — GB/T 37799-2019
National Standard of the People's Republic of China
- ICS
- 91.100.30
- Classification
- Q 14
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 terms, definitions and symbols
- 4 Category
- 5 raw and auxiliary materials
- 6 tube technical requirements
- 7 Test method
- 8 Inspection rules
- 9 Signs, transport and storage
- 10 Factory Certificate
- Appendix A (informative) Connector reference detail size
- Appendix B (normative appendix) External pressure load test indicators
1 Scope
This standard specifies the classification, raw and auxiliary materials, technical requirements for pipe making, test methods, inspection rules, signs, and transportation of reinforced concrete shaped pipes.
And storage, factory certificate and other content.
This standard applies to the production and manufacture of special-shaped pipe products using slotted construction. Production of reinforced concrete shaped pipes for other purposes
The negotiation between the supplier and the buyer may also be carried out with reference to this standard.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB 175 universal Portland cement
GB/T 748 anti-sulfate Portland cement
GB/T 1499.1 Steel for reinforced concrete - Part 1. Hot rolled round bars
GB/T 1499.2 Steel for reinforced concrete - Part 2. Hot rolled ribbed bars
GB/T 1596 for fly ash in cement and concrete
GB 8076 concrete admixture
GB 13788 cold rolled ribbed bar
GB/T 14684 construction sand
GB/T 14685 construction with pebbles and gravel
GB/T 16752 concrete and reinforced concrete drainage pipe test method
GB/T 18046 Granulated blast furnace slag powder for cement, mortar and concrete
GB/T 50081 Standard test method for mechanical properties of ordinary concrete
GB/T 50107 concrete strength inspection and evaluation standard
GB 50119 Concrete Admixture Application Technical Specifications
GB 50204 Concrete structure engineering construction quality acceptance specification
GB 50666 Concrete structure engineering construction specification
JC/T 540 low carbon cold drawn steel wire for concrete products
JGJ18 steel bar welding and acceptance procedures
JGJ55 general concrete mix design procedure
JGJ63 concrete water standard
Technical specification for JGJ95 cold rolled ribbed reinforced concrete structure
3 terms, definitions and symbols
3.1 Terms and definitions
The following terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37799-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37799-2019
$295.00